Abstract:High-speed light emitting diode (LED) based visible light communication (VLC) system is restricted by the limited LED bandwidth, low detector sensitivity, and linear and nonlinear distortions. Thus, single-and two-cascaded constant-resistance symmetrical bridged-T amplitude hardware pre-equalizers, carrierless amplitude and phase (CAP) modulation, and a three-stage hybrid postequalizer are investigated to increase transmission data rate for a high-speed LED-based VLC system. The schemes utilized by the hybrid postequalizer aremodified cascaded multimodulus algorithm, Volterra series based nonlinear compensation algorithm and decision-directed least mean square algorithm. With these technologies, we successfully implement high-speed CAP32, CAP64, and CAP128 VLC experimental system over 1-m free space transmission with bit error rate under the hard decision-forward error correction threshold of 3.8 x 10(-3). System performance improvement employing these key technologies is also validated through experimental demonstration. With the superposition of each stage of the hybrid postequalizer, system performance will be improved. And utilizing two-cascaded hardware pre-equalizer will provide more accurate channel compensation than a single pre-equalizer.

Enhanced Performance of Visible Light Communication Employing 512-QAM N-SC-FDE and DD-LMS.

Ultra-high-speed Single Red–green–blue Light-Emitting Diode-Based Visible Light Communication System Utilizing Advanced Modulation Formats

3.25-Gbps Visible Light Communication System Based on Single Carrier Frequency Domain Equalization Utilizing an RGB LED.

8-Gb/s Rgby Led-Based Wdm Vlc System Employing High-Order Cap Modulation and Hybrid Post Equalizer

45-Gb/s RGB-LED Based WDM Visible Light Communication System Employing CAP Modulation and RLS Based Adaptive Equalization

Demonstration of 575-Mb/s Downlink and 225-Mb/s Uplink Bi-Directional SCM-WDM Visible Light Communication Using RGB LED and Phosphor-Based LED

4.5-Gb/s RGB-LED based WDM visible light communication system employing CAP modulation and RLS based adaptive equalization

Application of Digital Signal Processing in High Speed Visible Light Communication System

1.2 Gbit/S Visible Light Transmission Based on Orthogonal Frequency-Division Multiplexing Using A Phosphorescent White Light-Emitting Diode and A Pre-Equalization Circuit

Multi-user High-Speed QAM-OFDMA Visible Light Communication System Using a 75-Μm Single Layer Quantum Dot Micro-Led

875-Mb/s Asynchronous Bi-Directional 64Qam-Ofdm Scm-Wdm Transmission over Rgb-Led-Based Visible Light Communication System

750Mbit/s Visible Light Communications Employing 64QAM-OFDM Based on Amplitude Equalization Circuit

High Speed Visible Light Communication System Using QAM-DMT Modulation Based on Digital Zero-Padding and Differential Receiver

Performance Comparison of OFDM Signal and CAP Signal over High Capacity RGB-LED-Based WDM Visible Light Communication

Improving Performance of 750-Mb/s Visible Light Communication System Using Adaptive Nyquist Windowing

A High-Speed Visible Light Communication System Based on Dft-S Ofdm

Indoor Gigabit 2 × 2 Imaging Multiple-Input–multiple-output Visible Light Communication

Enabling Technologies for High-Speed Visible Light Communication Employing CAP Modulation

10.72Gb/s Visible Light Communication System Based on Single Packaged RGBYC LED Utilizing QAM-DMT Modulation with Hardware Pre-Equalization

2.32 Gbit/S Phosphorescent White Led Visible Light Communication Aided by Two-Staged Linear Software Equalizer

Enhanced Performance of a VLC and ULEAPS Fiber Seamless Integrated System Employing Novel Weighted Pre-FDE)