Abstract:We propose and experimentally demonstrate a novel full-duplex bi-directional subcarrier multiplexing (SCM)-wavelength division multiplexing (WDM) visible light communication (VLC) system based on commercially available red-green-blue (RGB) light emitting diode (LED) and phosphor-based LED (P-LED) with 575-Mb/s downstream and 225-Mb/s upstream transmission, employing various modulation orders of quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM). For the downlink, red and green colors/wavelengths are assigned to carry useful information, while blue chip is just kept lighting to maintain the white color illumination, and for the uplink, the low-cost P-LED is implemented. In this demonstration, pre-equalization and post-equalization are also adopted to compensate the severe frequency response of LEDs. Using this scheme, 4-user downlink and 1-user uplink transmission can be achieved. Furthermore, it can support more users by adjusting the bandwidth of each sub-channel. Bit error rates (BERs) of all links are below pre-forward-error-correction (pre-FEC) threshold of 3.8x 10(-3) after 66-cm free-space delivery. The results show that this scheme has great potential in the practical VLC system.

10.72Gb/s Visible Light Communication System Based on Single Packaged RGBYC LED Utilizing QAM-DMT Modulation with Hardware Pre-Equalization

875-Mb/s Asynchronous Bi-Directional 64Qam-Ofdm Scm-Wdm Transmission over Rgb-Led-Based Visible Light Communication System

A High-Speed Bi-Directional Visible Light Communication System Based on RGB-LED

Demonstration of 575-Mb/s Downlink and 225-Mb/s Uplink Bi-Directional SCM-WDM Visible Light Communication Using RGB LED and Phosphor-Based LED

3.25-Gbps Visible Light Communication System Based on Single Carrier Frequency Domain Equalization Utilizing an RGB LED.

High Speed Visible Light Communication System Using QAM-DMT Modulation Based on Digital Zero-Padding and Differential Receiver

Enhanced Performance of Visible Light Communication Employing 512-QAM N-SC-FDE and DD-LMS.

Application of Digital Signal Processing in High Speed Visible Light Communication System

High-speed Visible Light Communication System Based on a Packaged Single Layer Quantum Dot Blue Micro-LED with 4-Gbps QAM-OFDM.

Real-time Bi-Directional Visible Light Communication System Utilizing a Phosphor-Based LED and RGB LED

8-Gb/s Rgby Led-Based Wdm Vlc System Employing High-Order Cap Modulation and Hybrid Post Equalizer

Multi-user High-Speed QAM-OFDMA Visible Light Communication System Using a 75-Μm Single Layer Quantum Dot Micro-Led

Ultra-high-speed Single Red–green–blue Light-Emitting Diode-Based Visible Light Communication System Utilizing Advanced Modulation Formats

3.22-Gb/s WDM Visible Light Communication of a Single RGB LED Employing Carrier-Less Amplitude and Phase Modulation

45-Gb/s RGB-LED Based WDM Visible Light Communication System Employing CAP Modulation and RLS Based Adaptive Equalization

800Gbps Visible Light Communication System Employing WDM and OAM Multiplexing

750 Mb/S Monochromatic Led-Based Real-Time Visible Light Communication System Employing A Low-Complexity Cascaded Post-Equalizer

4.5-Gb/s RGB-LED based WDM visible light communication system employing CAP modulation and RLS based adaptive equalization

Experimental demonstration of a RGB-LED based visible light communication system employing Carrierless Amplitude and Phase modulation

First Demonstration of Multi-user QAM-OFDMA Visible Light Communication System Based on a 75-Μm Single Layer Quantum Dot Blue Micro-LED

Indoor Gigabit 2 × 2 Imaging Multiple-Input–multiple-output Visible Light Communication