Abstract:High-speed light emitting diode (LED) based visible light communication (VLC) system is restricted by the limited LED bandwidth, low detector sensitivity, and linear and nonlinear distortions. Thus, single-and two-cascaded constant-resistance symmetrical bridged-T amplitude hardware pre-equalizers, carrierless amplitude and phase (CAP) modulation, and a three-stage hybrid postequalizer are investigated to increase transmission data rate for a high-speed LED-based VLC system. The schemes utilized by the hybrid postequalizer aremodified cascaded multimodulus algorithm, Volterra series based nonlinear compensation algorithm and decision-directed least mean square algorithm. With these technologies, we successfully implement high-speed CAP32, CAP64, and CAP128 VLC experimental system over 1-m free space transmission with bit error rate under the hard decision-forward error correction threshold of 3.8 x 10(-3). System performance improvement employing these key technologies is also validated through experimental demonstration. With the superposition of each stage of the hybrid postequalizer, system performance will be improved. And utilizing two-cascaded hardware pre-equalizer will provide more accurate channel compensation than a single pre-equalizer.

Enhanced Performance of a VLC and ULEAPS Fiber Seamless Integrated System Employing Novel Weighted Pre-FDE)

Seamless VLC and ULEAPS Fiber Transmission Employing Tapered Ag/AgI Coated Hollow Waveguide Based Beam Shaping

Enhanced Performance of Visible Light Communication Employing 512-QAM N-SC-FDE and DD-LMS.

1.2 Gbit/S Visible Light Transmission Based on Orthogonal Frequency-Division Multiplexing Using A Phosphorescent White Light-Emitting Diode and A Pre-Equalization Circuit

Gigabit LED‐based Visible Light Transparent Transmission from Free‐space to a 100‐m Ultra‐large Effective Area Pure Silica Fiber

2.32 Gbit/S Phosphorescent White Led Visible Light Communication Aided by Two-Staged Linear Software Equalizer

1.6 Gbit/s phosphorescent white LED based VLC transmission using a cascaded pre-equalization circuit and a differential outputs PIN receiver.

2.08Gbit/s Visible Light Communication Utilizing Power Exponential Pre-Equalization.

45-Gb/s RGB-LED Based WDM Visible Light Communication System Employing CAP Modulation and RLS Based Adaptive Equalization

A Gb/s VLC Transmission Using Hardware Preequalization Circuit

Maximization of Visible Light Communication Capacity Employing Quasi-Linear Preequalization with Peak Power Limitation

Ultra-high-speed Single Red–green–blue Light-Emitting Diode-Based Visible Light Communication System Utilizing Advanced Modulation Formats

3.25-Gbps Visible Light Communication System Based on Single Carrier Frequency Domain Equalization Utilizing an RGB LED.

8-Gb/s Rgby Led-Based Wdm Vlc System Employing High-Order Cap Modulation and Hybrid Post Equalizer

4.5-Gb/s RGB-LED based WDM visible light communication system employing CAP modulation and RLS based adaptive equalization

LED based high speed visible light communication local area network

3.075 Gb/s Underwater Visible Light Communication Utilizing Hardware Pre-Equalizer with Multiple Feature Points

A High-Speed Visible Light Communication System Based on Dft-S Ofdm

1.1-Gb/s White-Led-Based Visible Light Communication Employing Carrier-Less Amplitude and Phase Modulation

High Speed Led Based Visible Light Communication Networks for Beyond 10gb/s Wireless Access

Enabling Technologies for High-Speed Visible Light Communication Employing CAP Modulation