Extraction of Light Trapped Due to Total Internal Reflection Using Porous High Refractive Index Nanoparticle Films.

Peng Mao,Fangfang Sun,Hanchao Yao,Jing Chen,Bo Zhao,Bo Xie,Min Han,Guanghou Wang

DOI: https://doi.org/10.1039/c4nr01065e

2014-01-01

Abstract:Porous TiO2nanoparticle layers are fabricated by gas phase cluster beam deposition at glancing incidence.

What problem does this paper attempt to address?

Anisotropy Antireflection Tio2 Nanoparticle Films Fabricated With Directed Cluster Beam Deposition

Peng Mao,Jinhui Chen,Yang Zhou,Kaiming Liao,Bo Zhao,Junhao Han,Guanghou Wang,Min Han

DOI: https://doi.org/10.1002/pssc.201200338

2012-01-01

Abstract:Antireflection TiO2 nanoparticle film was fabricated on silica glass substrate by using directed cluster beam deposition method. Self-shadowing becomes a dominant growth mechanism for nanoparticle deposition at sufficiently large incident angles, which results in extremely porous nanoparticle stacking and yields excellent control over the refractive index profile. Inclined columnar and porous microstructure was confirmed with SEM and AFM. The TiO2 nanoparticle films show ultra-high transmittance, broadband and omnidirectional characters, which can be attributed to its porous structure and modulated refractive index. We also found that the film displays an angular selective optical transmittance. The highest antireflection enhancement of the light transmission can be obtained for light incidence along the nanoparticle columns. (C) 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Fabrication of non-collapsed hollow polymeric nanoparticles with shell thickness in the order of ten nanometres and anti-reflection coatings

ZhiJuan Sun,Yingwu Luo

DOI: https://doi.org/10.1039/c0sm00983k

IF: 4.046

2011-01-01

Soft Matter

Abstract:The non-collapsed hollow polymeric nanoparticles with shell thicknesses in the order of 10 nm are prepared by interfacially confined reversible addition fragmentation transfer (RAFT) miniemulsion polymerization. The void fraction and average diameter of the hollow polymeric nanoparticles could be largely tuned up to 0.58 and from 68 nm to 180 nm, respectively. The non-collapsed hollow polymeric nanoparticles could be a building block for nanoporous materials, which hold promise in many fields such as anti-reflection coatings, ultra-thermal insulation materials, catalysis and sensors.
Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Zhizheng Wu,Kangkai Wang,Guangzhong Yuan,Wen Li,Chenlu Song,Gaorong Han,Yong Liu

DOI: https://doi.org/10.1016/j.surfcoat.2016.06.050

2016-01-01

Abstract:Porous C-TiO2 nanocomposite films prepared by photopolymerization-induced phase-separation method (PIPS) exhibited three dimensional interconnected pores structure. Scanning electron microscopy (SEM), atomic force microscope (AFM), thermo-gravimetric and differential thermal analysis (TG-DTA), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, UV–Vis-NIR spectrophotometer are employed to characterize the structure and optical properties. The results illustrated that the photomonomer pentaerythritol triarylate (PETA) directly affects the relative molecular weight of polymer formed by photopolymerization to regulate the morphology and residual carbon of C-TiO2 nanocomposite films, and ultimately affects the solar selective absorption properties. The single layer of as-prepared porous C-TiO2 nanocomposite films exhibits high solar absorptance (α=0.766–0.863) with low thermal emittance (ε=0.06–0.12), yielding an optimized photothermal conversion efficiency η=α-ε of (0.706–0.762) corresponding to a wide redundancy PETA concentration 0.3–0.9 (molar ratio to Ti precursor). The proportion of residual carbon contributed by PVP, PETA and poly-PETA, and other substances of the sol is 40.2%, 56.2% and 3.6%, respectively, which might be regulated by a suitable annealing process. Based on these results, porous C-TiO2 nanocomposite films are proved to be a novel candidate material for mid-temperature solar selective absorber coatings.
Preparation and characterization of porous carbon–titania nanocomposite films as solar selective absorbers

bihua cheng,kung k wang,mei li,weihong jiang,b j cong,c l song,s h jia,gao rong han,yizhi liu

DOI: https://doi.org/10.1016/j.jallcom.2015.02.069

IF: 6.2

2015-01-01

Journal of Alloys and Compounds

Abstract:•The nanocomposites porous C/TiO2 film were fabricated via PIPS method.•The HRTEM reveals the size of carbon nanoparticles is about 1.1nm.•The PVP advantages residual carbon content but suppresses its crystallization.•The film exhibits high α (0.928–0.959) with low ε (0.074–0.105) for single layer.
High performance hierarchical nanoporous antireflective films by a facile sol–gel process

Yao Xiao,Ronghua Ma,Changjian Wang,Xinkai Chen,Xvsheng Qiao,Xianping Fan

DOI: https://doi.org/10.1039/c6ra20524k

IF: 4.036

2016-01-01

RSC Advances

Abstract:Single layer antireflection (SLAR) sol-gel films on super white glass substrates were prepared by hierarchically introducing hollow silica nano-spheres (HSNs) and F127 templated nano-pores. HSNs and F127 templated nano-pores were formed by base and acid catalyzed sol-gel processes, respectively. The dispersibility of HSNs was ameliorated by Ph-TES surface modifications. The porosity of the SLAR films was engineered by a step-by-step addition of nano-pores and HSNs so that the refractive index could be tuned to be as low as the desired value of 1.24. It accordingly improved the transmittance of the films with an optimized maximum transmittance of 98.21% in the visible spectral region. Furthermore, the concentration of modified HSNs was adjusted to modulate the peak transmittance wavelength from 550 nm to 680 nm. The nano-scale surface embossments due to the addition of HSNs was also contributory to the antireflective effect of the films, especially at 45 degrees or 5 degrees incident angle. As a result, the average transmittance of the double side coating super white glass was increased by 7.10% at 400-1000 nm with good wear resistance. The porosity directed mechanical durability varied from 6H to 3H (pencil hardness). It displays considerable AR application prospects for suitable optical and optoelectronic devices.
Porous Carbon–titania Nanocomposite Films for Spectrally Solar Selective Absorbers

B. Cheng,K. K. Wang,K. P. Wang,W. Jiang,B. J. Cong,C. L. Song,S. H. Jia,G. R. Han,Y. Liu

DOI: https://doi.org/10.1016/j.solmat.2014.10.032

2015-01-01

Abstract:Selective solar absorbers based on composition of porous titania and carbon with a well-defined interconnected macropores structure have been fabricated by a photopolymerization-induced phase-separation method in the framework of a sol–gel technique. Scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, thermogravimetric and differential thermal analysis, Fourier transform infrared spectroscopy, and spectroscopic ellipsometry were used to characterize the C–TiO2 films. The results showed that the macroporous structures of the films could be tuned by changing the reaction parameters. The reduction of the HNO3 concentration in the solution effectively decreases the mean size of pores, carbon content, and the thickness of the nanocomposite films, leading to an optimization of the spectral selective absorption performance. The solar absorptance (α) and thermal emittance (ε) of the optimized single layer film with a thickness of about 300nm were about 0.95 and 0.12, respectively. The films also show good stability under the high temperature (~500°C). Based on these results, porous carbon–titania composite films proved to be a good candidate as solar selective absorbers.
Study of Ray Tracing Algorithm in the Scattering of Nano-particle Thin Films

XU Tian-hua,SONG Chen-lu,LIU Yong,HAN Gao-rong

DOI: https://doi.org/10.3969/j.issn.1673-2812.2006.01.032

2006-01-01

Abstract:In this paper,a theoretical simulation of light propagation in gradient-index film was proposed.Ray Tracing Algorithm and Monte Carlo simulation method that based on Maxwell's equations are employed.The gradient-index film is assumed to be a combination of multiplayer homogeneous films,whose complex refractive indexes depend on their depth in gradient-index film.The results show the influences on film reflection from particle's density,diameter and the gradient refractive index.It would help us to design a new kind of low-refractive film,and we may use this method to solve the 'light pollution' problem.Advanced researches are also wanted.
Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

Fei Tao,Pritesh Hiralal,Lianbing Ren,Yong Wang,Qing Dai,Gehan Aj Amaratunga,Hang Zhou

DOI: https://doi.org/10.1186/1556-276X-9-361

2014-01-01

Nanoscale Research Letters

Abstract:Subwavelength nanostructures are considered as promising building blocks for antireflection and light trapping applications. In this study, we demonstrate excellent broadband antireflection effect from thin films of monolayer silica nanospheres with a diameter of 100 nm prepared by Langmuir-Blodgett method on glass substrates. With a single layer of compact silica nanosphere thin film coated on both sides of a glass, we achieved maximum transmittance of 99% at 560 nm. Furthermore, the optical transmission peak of the nanosphere thin films can be tuned over the UV-visible range by changing processing parameters during Langmuir-Blodgett deposition. The tunable optical transmission peaks of the Langmuir-Blodgett films were correlated with deposition parameters such as surface pressure, surfactant concentration, ageing of suspensions and annealing effect. Such peak-tunable broadband antireflection coating has wide applications in diversified industries such as solar cells, windows, displays and lenses.
A facile process to prepare crosslinked nano-graphites uniformly dispersed in titanium oxide films as solar selective absorbers

kung k wang,z z wu,chun jia peng,bihua cheng,c l song,gao rong han,yue liu

DOI: https://doi.org/10.1016/j.solmat.2015.06.060

IF: 6.9

2015-01-01

Solar Energy Materials and Solar Cells

Abstract:A composite film containing uniform nano-crystallized carbon (nc-C) embedded in titanium oxide (TiO2) matrix has been fabricated by a facile sol–gel technique as selective solar absorbers. The high-resolution transmission electron microscopy demonstrated the nc-C grains, whose size ranges from 2nm to 10nm, make up a crosslinked network. The structural template (polyethylene glycol) used in the present work could tune the carbon contents of the composite films. The optimized solar absorptance and thermal emittance of the single layer film on copper substrate were about 0.939 and 0.195, respectively. The little deterioration after aging test (at 500°C for 30h in vacuum) demonstrated an outstanding durability of nc-C/TiO2 nano-composite films. Further investigations on the structure and solar selective properties revealed that both excellent optical performance and structural stabilities benefit from nc-C and nano-composite effects. Therefore, this nc-C/TiO2 film has been proved to be a good candidate for solar selective absorbers.
ANALYSIS ON THE ANTIREFLECTION OF SILICON-NANOPARTICLE FILMS AT THE SURFACE OF SILICON SOLAR CELLS

Qing Li,Pianpian Ma,Wenda Zhao,Xiaodong Pi,Deren Yang

DOI: https://doi.org/10.3969/j.issn.0254-0096.2012.11.003

2012-01-01

Abstract:We have studied the possibility of enhancing the light absorption of silicon solar cells by forming porous silicon-nanoparticle (Si-NP) films at the solar cell surface. For both unencapsulated and encapsulated silicon solar cells, the size of Si NPs hardly affects the light transmission to the photo-current conversion area. The maximum light absorption enhancement is obtained when the porosity of Si-NP films is about 70%. After solar cell encapsulation the light absorption enhancement is weakened. We have also considered the effect of Si-NP films on the light absorption of silicon solar cells as the light incidence angle varies.
Extraction of Optical Constants and Thickness of Nanometre Scale Tio2 Film

YG Yang,PJ Liu,Y Wang,YF Zhang

DOI: https://doi.org/10.1088/1009-1963/14/11/032

2005-01-01

Abstract:TiO2 thin films were deposited on glass substrates by sputtering in a conventional rf magnetron sputtering system. X-ray diffraction pattern and transmission spectrum were measured. The curves of refraction index and extinction coefficient distributions as well as the thickness of films calculated from transmission spectrum were obtained. The optimization problem was also solved using a method based on a constrained nonlinear programming algorithm.
Control of optical properties of TiN x O y films and application for high performance solar selective absorbing coatings

feiliang chen,shaowei wang,liming yu,xiaoshuang chen,wei lu

DOI: https://doi.org/10.1364/OME.4.001833

2014-01-01

Optical Materials Express

Abstract:TiNxOy films with controllable optical properties have been fabricated by reactive mid-frequency magnetron sputtering from titanium nitride target. The optical and electrical properties were studied as a function of the reactive gas flow and were correlated with the film stoichiometry. The results showed that the behavior of TiNxOy films can be adjusted from metallic to dielectric by increasing oxygen content, which is of great significance to their extensive applications. Owing to the accurate control of optical properties, a TiNxOy based solar selective absorbing coating has been designed and prepared with the aid of TiO2/Si3N4/SiO2 antireflection layers. Its solar absorbance is as high as 97.5% and thermal emissivity is 4.3% with total thickness of 230 nm. The solar absorbance can maintain above 90% for a broad incident angle range from 0 degrees to 65 degrees. (C)2014 Optical Society of America
TiO2 nanocomposites with high refractive index and transparency

peng tao,yu li,atri rungta,anand viswanath,jianing gao,brian c benicewicz,r w siegel,linda s schadler

DOI: https://doi.org/10.1039/c1jm13093e

2011-01-01

Journal of Materials Chemistry

Abstract:Transparent polymer nanocomposites with high refractive index were prepared by grafting polymer chains onto anatase TiO2 nanoparticles via a combination of phosphate ligand engineering and alkyne-azide "click" chemistry. Highly crystalline TiO2 nanoparticles with 5 nm diameter were synthesized by a solvothermal method and used as high refractive index filler. The synthesized phosphate-azide ligand anchors strongly onto the TiO2 nanoparticle surface and the azide end group allows for attachment of poly(glycidyl methacrylate) (PGMA) polymer chains through an alkyne-azide "click" reaction. The refractive index of the composite material increased linearly from 1.5 up to 1.8 by increasing the loading of TiO2 particles to 30 vol % (60 wt %). UV-vis spectra show that the nanocomposites exhibited a transparency around 90% throughout the visible light range. It was also found that the PGMA-grafted TiO2 nanoparticles can be well dispersed into a commercial epoxy resin, forming transparent high refractive index TiO2-epxoy nanocomposites.
Nanoporous Silicon Dioxide Films for Large Area and Low-Cost Fabrication of Ultra-Low Refractive Index Coatings

Han Wu,Can Liu,Zeyu Zhu,Yu Shao,Jie Lin,Junren Wen,Hailan Wang,Yueguang Zhang,Tao Liang,Yuchuan Shao,Weidong Shen,Chenying Yang

DOI: https://doi.org/10.1021/acsanm.3c01963

IF: 6.14

2023-08-24

ACS Applied Nano Materials

Abstract:Ultralow refractive index films can reduce the reflection loss of light propagating between different media, which is crucial for enhancing the performance and efficiency of optical components. This work presents an approach to the production of ultralow refractive index thin films based on magnetron cosputtering and subsequent selective chemical etching, where a nanoporous silicon dioxide film with a variable refractive index is fabricated by the sacrificial method of forming random holes with a size less than 100 nm. The effective refractive index can be adjusted from 1.1 to 1.46 by simply controlling the sputtering power ratio of the silicon target to the aluminum target. The antireflection properties of ultralow refractive index films have been verified, and their process reproducibility and environmental reliability have been evaluated. The results demonstrate the efficacy of this technique as a viable solution for large-area, low-cost, and high-performance fabrication of ultralow refractive index coatings, which have great potential for the preparation of industrial-scale antireflective films.

materials science, multidisciplinary,nanoscience & nanotechnology
Bulk Transparent Epoxy Nanocomposites Filled with Poly(Glycidyl Methacrylate) Brush-Grafted Tio2 Nanoparticles

Peng Tao,Anand Viswanath,Ying Li,Richard W. Siegel,Brian C. Benicewicz,Linda S. Schadler

DOI: https://doi.org/10.1016/j.polymer.2013.01.032

IF: 4.6

2013-01-01

Polymer

Abstract:Poly(glycidyl methacrylate) polymer brushes were grafted onto TiO2 nanoparticle surfaces via a combination of phosphate ligand engineering and Cu-catalyzed alkyne-azide "click" reaction. The grafted TiO2 nanoparticles are compatible with a commercial epoxy resin enabling the preparation of thick (1 mm) transparent high-refractive index TiO2/epoxy nanocomposites. In order to maximize the volumetric loading and thereby the refractive index of nanocomposites, the minimum graft densities that can lead to high optical transparency were identified. It was found that, when the graft density was too low to form polymer brushes, the dispersion of the grafted particles changed from a dispersed state to an agglomerated state. The transition of the dispersion state was in good agreement with the theoretical prediction from a parametric model. This good agreement will facilitate the design and fabrication of transparent polymer nanocomposites filled with grafted nanoparticles. With 30 wt% loading of TiO2 nanoparticles, the refractive index of TiO2/epoxy nanocomposites increased from 1.5 for neat epoxy to 1.62. The transparency of the prepared nanocomposites can be well predicted by the Raleigh scattering model. Published by Elsevier Ltd.
Effects of Porous Films on the Light Reflectivity of Pigmentary Titanium Dioxide Particles

Yong Liang,Bing Qiao,Tig-Jie Wang,Han Gao,Keyi Yu

DOI: https://doi.org/10.1016/j.apsusc.2016.06.131

IF: 6.7

2016-01-01

Applied Surface Science

Abstract:The light reflectivity of the film-coated titanium dioxide particles (TiO2) as a function of the film refractive index was derived and calculated using a plane film model. For the refractive index in the range of 1.00-2.15, the lower the film refractive index is, the higher is the light reflectivity of the film. It is inferred that the lower apparent refractive index of the porous film resulted in the higher reflectivity of light, i.e., the higher hiding power of the titanium dioxide particles. A dense film coating on TiO2 particles with different types of oxides, i.e., SiO2, Al2O3, MgO, ZnO, ZrO2, TiO2, corresponding to different refractive indices of the film from 1.46 to 2.50, was achieved, and the effects of refractive index on the hiding power from the model prediction were confirmed. Porous film coating of TiO2 particles was achieved by adding the organic template agent triethanolamine (TEA). The hiding power of the coated TiO2 particles was increased from 88.3 to 90.8 by adding the TEA template to the film coating (5-20 wt%). In other words, the amount of titanium dioxide needed was reduced by approximately 10% without a change in the hiding power. It is concluded that the film structure coated on TiO2 particle surface affects the light reflectivity significantly, namely, the porous film exhibits excellent performance for pigmentary titanium dioxide particles with high hiding power. (C) 2016 Elsevier B.V. All rights reserved.
Al 2 O 3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance.

Sadaf Bashir Khan,Hui Wu,Zheng Xie,Weipeng Wang,Zhengjun Zhang

DOI: https://doi.org/10.1021/acsami.7b12903

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Scientific advancement is highly inspired and imitative of natural phenomenon's, which exhibits extremely developed and well-organised nanostructures to cope with challenges under different environmental circumstances, such as moth eyes protuberances for efficient anti-reflective (AR) performance. Innovative researches have been performed in the past to exterminate the undesirable reflectance in common optical components and optoelectronic industrial applications by biomimetic and replicating moth eye nanostructures creating gradient effect using metal oxides, composites or polymers in multilayer AR coatings. However, in few multilayer AR designs, the properties mismatch at interfaces, high cost, low mechanical durability, wetting issues or thermal stability bounds their practical applicability. Herein, we develop an approach for fabricating efficient, high-performance Teflon (polytetrafluoroethylene [PTFE]) AR nanostructures for glass-based supporting materials. Nanotailoring, the morphology and structure of PTFE, have been efficaciously carried out for fabricating high-performance AR coatings according to predicted optical simulation. The total reflectance from polymer AR coating lessens to <0.05% in a visible wavelength range which according to our best knowledge seems to be the superior AR performance by a polymer coating ever reported. Furthermore, the fabricated polymer AR coatings are omnidirectional, mechanically durable, and thermally stable up to 200ᵒC. Moreover, we modify and tune the refractive index of PTFE from 1.34 to 1.156 by inducing porosity and changing deposition angle.
In-situ Deposition of Oxidized Porous Metal Nanoparticles on the Surface of Picosecond Laser-Induced Micro/nano Structures: A New Kind of Meta-Surface Equipped with Both Super-Hydrophobicity and Anti-Reflectivity

Aifei Pan,Xuesong Mei,Wenjun Wang,Yong Xia,Ya-Qiong Su,Sikai Zhao,Tong Chen

DOI: https://doi.org/10.1016/j.cej.2023.141582

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:This paper proposes a new kind of composite micro/nano structure composed of porous nanomaterials including titanium (Ti) gradient material and titania (TiO2) gradient material. The composite structure is fabricated via in -situ deposition of gradiently distributed and oxidized porous titanium nanoparticles on the surface of picosecond laser-induced micro/nano structures. The porous composite layer made up of Ti gradient material and TiO2 gradient material shows the best anti-reflectivity. The ability of TiO2 for absorbing -CH3 hydrophobic group and the air cushion effect of nanostructure endow the TiO2 gradient porous material with hydrophobic character-istics. Then, the period and height of the desired microstructure of the composite micro/nano structure with the best super-hydrophobicity and anti-reflectivity are confirmed to be about 10 mu m and more than 10 mu m, respectively. The designed composite micro/nano structures are fabricated using picosecond laser induction processing strategy with the etched depth of the materials being only about 12 mu m. The reflectance of the designed composite micro/nano structure is around 2 % from the visible band to the near-infrared band and below 20 % from the ultraviolet to middle-infrared band. Moreover, its slip angle is just 4 degrees and contact angle 167.
A highly efficient, eco‐friendly method for antireflection nanostructures on poly (ethylene terephthalate)

Hongkun Zhou,Lan Mu,Ruibin Liang,Linfeng Lan

DOI: https://doi.org/10.1002/jsid.1336

2024-06-27

Journal of the Society for Information Display

Abstract:A highly efficient, eco‐friendly solvent‐free, and sputtering target‐free method for reducing the reflection of the substrate is introduced. The average transmittance is improved from 91.6% to 94.8%, which is attributed to the gradient refractive index of the nanostructured surface. Antireflection surfaces are widely used in optical devices (such as vehicle display, solar cells, and architectural glass) to reduce the reflection and increase transmittance. Plasma etching shows great potential in making subwavelength antireflection structures for its advantage of scalable, low‐cost, and applicable in flexible substrates. Here, we demonstrate an antireflection nanostructure by O2 plasma etching on poly (ethylene terephthalate) (PET) substrate without additional corrosive gas species or antireflective coatings. Nanopores on the surface were formed due to the different etching rates of the organic region and silica region of the surface. The solar weighted average transmittance was improved from 91.6% to 94.8% for single‐side treated PET with silica antiblocking layer. The transmission increment was attributed to the gradient refractive index of the nanostructured surface due to the elimination of step discontinuity in refractive index. The result shows a highly efficient, eco‐friendly, solvent‐free, economical, and sputtering target‐free method for reducing the reflection and increasing the transmittance of the substrates.

engineering, electrical & electronic,materials science, multidisciplinary,optics,physics, applied
Al2O3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance

Sadaf Bashir Khan,Hui Wu,Zheng Xie,Weipeng Wang,Zhengjun Zhang

DOI: https://doi.org/10.1021/acsami.7b12903

2017-10-18

Abstract:Scientific advancement is highly inspired and imitative of natural phenomenon's, which exhibits extremely developed and well-organized nanostructures to cope with challenges under different environmental circumstances, such as moth eyes protuberances for efficient antireflective (AR) performance. Innovative researches have been performed in the past to exterminate the undesirable reflectance in common optical components and optoelectronic industrial applications by biomimetic and replicating moth eye nanostructures creating gradient effect using metal oxides, composites, or polymers in multilayer AR coatings. However, in few multilayer AR designs, the properties mismatch at interfaces, high cost, low mechanical durability, wetting issues, or thermal stability bounds their practical applicability. Herein, we develop an approach for fabricating efficient, high-performance Teflon (polytetrafluoroethylene [PTFE]) AR nanostructures for glass-based supporting materials. Nanotailoring, the morphology and structure of PTFE, have been efficaciously carried out for fabricating high-performance AR coatings according to predicted optical simulation. The total reflectance from polymer AR coating lessens to <0.05% in a visible wavelength range which according to our best knowledge seems to be the superior AR performance by a polymer coating ever reported. Furthermore, the fabricated polymer AR coatings are omnidirectional, mechanically durable, and thermally stable up to 200 °C. Moreover, we modify and tune the refractive index of PTFE from 1.34 to 1.156 by inducing porosity and changing deposition angle.

Extraction of Light Trapped Due to Total Internal Reflection Using Porous High Refractive Index Nanoparticle Films.

Anisotropy Antireflection Tio2 Nanoparticle Films Fabricated With Directed Cluster Beam Deposition

Fabrication of non-collapsed hollow polymeric nanoparticles with shell thickness in the order of ten nanometres and anti-reflection coatings

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Preparation and characterization of porous carbon–titania nanocomposite films as solar selective absorbers

High performance hierarchical nanoporous antireflective films by a facile sol–gel process

Porous Carbon–titania Nanocomposite Films for Spectrally Solar Selective Absorbers

Study of Ray Tracing Algorithm in the Scattering of Nano-particle Thin Films

Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

A facile process to prepare crosslinked nano-graphites uniformly dispersed in titanium oxide films as solar selective absorbers

ANALYSIS ON THE ANTIREFLECTION OF SILICON-NANOPARTICLE FILMS AT THE SURFACE OF SILICON SOLAR CELLS

Extraction of Optical Constants and Thickness of Nanometre Scale Tio2 Film

Control of optical properties of TiN x O y films and application for high performance solar selective absorbing coatings

TiO2 nanocomposites with high refractive index and transparency

Nanoporous Silicon Dioxide Films for Large Area and Low-Cost Fabrication of Ultra-Low Refractive Index Coatings

Bulk Transparent Epoxy Nanocomposites Filled with Poly(Glycidyl Methacrylate) Brush-Grafted Tio2 Nanoparticles

Effects of Porous Films on the Light Reflectivity of Pigmentary Titanium Dioxide Particles

Al 2 O 3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance.

In-situ Deposition of Oxidized Porous Metal Nanoparticles on the Surface of Picosecond Laser-Induced Micro/nano Structures: A New Kind of Meta-Surface Equipped with Both Super-Hydrophobicity and Anti-Reflectivity

A highly efficient, eco‐friendly method for antireflection nanostructures on poly (ethylene terephthalate)

Al2O3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance