Abstract:Within the domain of optical frequency comb systems operating in the mid-infrared, extensive exploration has been undertaken regarding critical parameters such as stabilization, coherence, or spectral tunability. Despite this, certain essential parameters remain inadequately addressed, particularly concerning the light source prerequisites for advanced spectroscopy techniques operating in the 3-5 ${\mu}$m spectral region. Specifically, the necessity for high simultaneous stability of average power, spectral shape, and temporal properties, alongside requirements for excellent beam quality and high powers of several Watts, emerges for applications like cavity-enhanced Doppler-free saturation spectroscopy. Existing systems fall short of meeting these rigorous criteria. This study delves into the metrology aspects of an optical parametric oscillator system, with a particular emphasis on its suitability for powerhungry metrology applications. Notably, the highest average power reported in the 3-5 ${\mu}$m region, reaching 10.3W for the idler output at 3.1 ${\mu}$m, is achieved. Additionally, new aspects, like the analysis of idler phase noise and beam quality and the onset of higher order modes are discussed. These findings represent a significant advancement towards the realization of highly-stable, metrologygrade frequency combs in the mid-infrared, thereby facilitating precision spectroscopy techniques previously constrained by light source average powers and quality limitations.

Note: Efficient Generation of Optical Sidebands at GHz with a High-Power Tapered Amplifier.

Characterization of a high-power tapered semiconductor amplifier system

High-Power, Spectrally Stabilized, Near-Diffraction-Limited 970 Nm Laser Light Source Based on Truncated-Tapered Semiconductor Optical Amplifiers with Low Confinement Factors

Intense, wideband optical waveform generation by self-balanced amplification of fiber electro-optical sideband modulation

Generation of 130 mW of 397.5 nm tunable laser via ring-cavity-enhanced frequency doubling

High-Gain and Narrow-Bandwidth Optical Amplifier Via Optomechanical Four-Wave Mixing

Design and construction of cost-effective tapered amplifier systems for laser cooling and trapping experiments

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

Controlled Generation of Wavelength-Tunable Higher Order Poincaré Sphere Beams From a Femtosecond Optical Parametric Oscillator

Millimeter-Wave Signal Generation Using Two Cascaded Optical Modulators and FWM Effect in Semiconductor Optical Amplifier

Theoretical and experimental analysis of high-power frequency-stabilized semiconductor master oscillator power-amplifier system

Low Phase Noise, Record-High Power Optical Parametric Oscillator Tunable from 2.7-4.7 μm for Metrology Applications

Efficient harmonic generation of broad-band high power laser and its new developments

High power, continuous-wave, single frequency fiber amplifier at 1091 nm and frequency doubling to 545.5 nm

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

Kilowatt-level supercontinuum generation employing a homemade taper-shaped ytterbium-doped fiber amplifier

Broadband Frequency Conversion and “area Law” in Tapered Waveguides

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

High-power single-mode laser diodes with tapered amplifiers

Single-cycle, MHz repetition rate THz source with 66 mW of average power

Generation of 120 GW Mid-Infrared Pulses from a Widely Tunable Noncollinear Optical Parametric Amplifier.