Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Organic Photovoltaic Cells with Stable Top Metal Electrodes Modified with Polyethylenimine

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Ambient Stable Large-Area Flexible Organic Solar Cells Using Silver Grid Hybrid with Vapor Phase Polymerized Poly(3,4-Ethylenedioxythiophene) Cathode

Efficient Organic Photovoltaics Using Solution-Processed, Annealing-Free TiO2 Nanocrystalline Particles As an Interface Modification Layer

Solution Processed ITO-free Organic Photovoltaic Devices

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference

Metal Electrode-Free Perovskite Solar Cells with Transfer-Laminated Conducting Polymer Electrode

Vacuum-Free And Metal Electrode-Free Organic Tandem Solar Cells

Copper phosphotungstate as low cost, solution-processed, stable inorganic anode interfacial material enables organic photovoltaics with over 18% efficiency

High-Performance Polymer Solar Cells Realized by Regulating the Surface Properties of PEDOT:PSS Interlayer from Ionic Liquids.

A Polymeric Two‐in‐One Electron Transport Layer and Transparent Electrode for Efficient Indoor All‐Organic Solar Cells

Towards Transparent Conductive Zinc Oxide Films As Effective Anodes in Organic Photovoltaics

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Nonhalogenated Photoactive Layer PBDB‐T:BTP‐M‐Based Organic Solar Cells with Efficient and Stable Performance

Organic Solar Cell Based on Poly(2-Methoxy, 5-(2'-ethylhexyloxy)-1,4-phenylene Vinylene) As an Electron Donating Material

Fine‐Tuning Conformation of PEDOT Chains Enables Simultaneously Enhanced Conductivity, Work Function, Transmittance, and Waterproofness in PEDOT:PSS Interlayer for Highly Efficient and Stable Organic Photovoltaics

Electropolymerized Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonate) (PEDOT:PSS) Film on ITO Glass and Its Application in Photovoltaic Device

ITO-free Flexible Organic Photovoltaics with Multilayer MoO3/LiF/MoO3/Ag/MoO3as the Transparent Electrode

Organic Solar Cells' Efficiency Enhanced by Perylene Monoimide Phosphorus Salt Cathode Interfacial Layer

ITO-free Photovoltaic Cell Utilizing a High-Resolution Silver Grid Current Collecting Layer