Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Vacuum-Free And Metal Electrode-Free Organic Tandem Solar Cells

Tandem Organic Solar Cell with 20.2% Efficiency

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Efficient Organic Tandem Solar Cells Enabled by Solution‐Processed Interconnection Layer and Fine‐Tuned Active Layer

Nonfullerene Tandem Organic Solar Cells with High Open‐Circuit Voltage of 1.97 V

Vacuum-Free Laminated Top Electrode with Conductive Tapes for Scalable Manufacturing of Efficient Perovskite Solar Cells

Toward Efficient Tandem Organic Solar Cells: From Materials to Device Engineering

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

An organic cathode for low-temperature processed, flexible ternary organic solar cells with high-performance

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Novel Polymer-Based Organic/c-Si Monolithic Tandem Solar Cell: Enhanced Efficiency using Interlayer and Transparent Top Electrode Engineering

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Self‐organized anode interlayer enables PEDOT: PSS free structure for thick‐film organic solar cells over 16% efficiency

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Microcavity-enhanced light-trapping for highly efficient organic parallel tandem solar cells.

PEDOT:PSS‐Free Polymer Non‐Fullerene Polymer Solar Cells with Efficiency up to 18.60% Employing a Binary‐Solvent‐Chlorinated ITO Anode

A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells