Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Facile One-Step Synthesis of Highly Branched ZnO Nanostructures on Titanium Foil for Flexible Dye-Sensitized Solar Cells

Tio2 Nanowires/Zno Nanosheets Hierarchically Structure on Ti Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

Nanorod-Nanosheet Hierarchically Structured Zno Crystals on Zinc Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

Facile Preparation of Hierarchical TiO2nanowire–nanoparticle/nanotube Architecture for Highly Efficient Dye-Sensitized Solar Cells

Bending Durable and Recyclable Mesostructured Perovskite Solar Cells Based on Superaligned ZnO Nanorod Electrode

In Situ Growth of Zinc Oxide Nanoribbons Within the Interstices of a Zinc Stannate Nanoplates Network on Compacted Woven Metal Wires and Their Enhanced Solar Energy Application

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

Design of highly ordered hierarchical catalytic nanostructures as high-flexibility counter electrodes for fiber-shaped dye-sensitized solar cells

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Controllable growth of dendritic ZnO nanowire arrays on a stainless steel mesh towards the fabrication of large area, flexible dye-sensitized solar cells.

Highly ordered hierarchical TiO2 nanotube arrays for flexible fiber-type dye-sensitized solar cells

Titanium Dioxide (TiO2) Sensitized Zinc Oxide (ZnO)/Conducting Polymer Nanocomposites for Improving Performance of Hybrid Flexible Solar Cells

A Zno Nanorod/Nanoparticle Hierarchical Structure Synthesized Through A Facile in Situ Method for Dye-Sensitized Solar Cells

Vertically Building Zn2SnO4 Nanowire Arrays on Stainless Steel Mesh Toward Fabrication of Large-Area, Flexible Dye-Sensitized Solar Cells.

Facile in situ synthesis of dendrite-like ZnO/ZnTe core/shell nanorod heterostructures for sensitized solar cells

Structural improvement of ZnO electrodes through solution-processed routes for enhancing open-circuit voltage in dye-sensitized solar cells

One-step large-scale synthesis of porous ZnO nanofibers and their application in dye-sensitized solar cells

Substrate Placement Angle-Dependent Growth of Dandelion-Like Tio2 Nanorods for Solid-State Semiconductor-Sensitized Solar Cells

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Facile synthesis of ZnO micro-nanostructures with controllable morphology and their applications in dye-sensitized solar cells