Abstract:A lithium-sulfur (Li-S) battery has a high theoretical specific capacity (1675 mAh g-1 of elemental sulfur) and a high nominal energy density (2500 Wh kg-1 of cell weight), which offers the prospect of a significant energy density improvement compared to the mainstream lithium-ion batteries (150 Wh kg-1). However, the development of Li-S battery technology has been plagued by problems arising from the highly insulating nature of sulfur (5×10-30 S cm-1 at 25 °C), the high solubility of lithium polysulfides in the electrolyte and volumetric expansion of sulfur during lithiation. Here, we demonstrate the design and preparation of few-layer graphene (FLG) foam scaffold for sulfur loading to fabricate cathode structures for lithium-sulfur batteries. In this work, a free-standing FLG monolithic network foam was formed as a negative of a Ni metallic foam template by CVD followed by etching away of Ni. Then, a three-dimensional (3-D) cathode system for lithium sulfur (Li-S) batteries has been synthesised by loading sulfur on to this interconnected network of few-layered graphene (FLG) via a sulfur solution infiltration method. This cathode system did not require any additional binding agents, conductive additives or a separate metallic current collector thus decreasing the weight of the cathode by typically ~20-30 wt%. A Li-S battery with the sulfur/FLG foam cathode shows good electrochemical stability and high rate discharge capacity retention for up to 400 discharge/charge cycles at a high current density of 3200 mA g-1, which due to the FLG foam offers excellent electrical conductivity, an appropriate pore structure for containing the electro-active sulfur and facilitates rapid electron/ion transport. Even after 400 cycles the capacity decay is only ~0.064% per cycle relative to the early (e.g. the 5th cycle) discharge capacity, while yielding an average columbic efficiency of ~96.2%. To further understand the sulfur loading ability of FLG foam, the composites with high content (up to 72 wt %) were also investigated. The composite with high content of sulfur still presented good initial discharge capacity and good cycle stability after 200 cycles. Our results indicate the potential suitability of graphene foam for efficient and high-performance batteries.

Unstacked Double-Layer Templated Graphene for High-Rate Lithium–sulphur Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

3D Mesoporous Graphene: CVD Self-Assembly on Porous Oxide Templates and Applications in High-Stable Li-S Batteries.

Fe3O4-Decorated Porous Graphene Interlayer for High-Performance Lithium-Sulfur Batteries

Mesoporous N-doped graphene prepared by a soft-template method with high performance in Li-S batteries.

Thermal Exfoliation of Layered Metal–Organic Frameworks into Ultrahydrophilic Graphene Stacks and Their Applications in Li–S Batteries

Graphene-based interlayer for high-performance lithium–sulfur batteries: A review

Dense Graphene Monolith for High Volumetric Energy Density Li–S Batteries

Sulfur-infiltrated Graphene-Based Layered Porous Carbon Cathodes for High-Performance Lithium-Sulfur Batteries.

Stacked-graphene Layers As Engineered Solid-Electrolyte Interphase (SEI) Grown by Chemical Vapour Deposition for Lithium-Ion Batteries

Hierarchically Porous and Minimally Stacked Graphene Cathodes for High‐Performance Lithium–Oxygen Batteries

Graphene-based Fe-coordinated framework porphyrin as an interlayer for lithium–sulfur batteries

3D Hierarchically Interconnected Porous Graphene Containing Sulfur for Stable High Rate Li-S Batteries

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Enhanced Cycle Performance in a Binder Free Lithium Sulfur Battery Using Few-Layer Graphene Foam Scaffold

Lithium–Sulfur Batteries: CaO‐Templated Growth of Hierarchical Porous Graphene for High‐Power Lithium–Sulfur Battery Applications (adv. Funct. Mater. 4/2016)

Nitrogen, Sulfur-Codoped Graphene Sponge As Electroactive Carbon Interlayer for High-Energy and -Power Lithium–sulfur Batteries

Interlayer-Expanded Metal Sulfides on Graphene Triggered by a Molecularly Self-Promoting Process for Enhanced Lithium Ion Storage

Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries

Integration of Graphene, Nano Sulfur, and Conducting Polymer into Compact, Flexible Lithium-Sulfur Battery Cathodes with Ultrahigh Volumetric Capacity and Superior Cycling Stability for Foldable Devices

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture