Abstract:The increasing demands for electrical vehicles and portable devices push us to explore novel energy storage systems with higher energy density as well as lower cost. Li-S battery, which utilizes sulfur as the cathode materials, is believed to be a promising candidate of the commonly used Li-ion batteries due to its high energy density (1675 mAh/g). Unfortunately, the poor electric conductivity of sulfur and the dissolution of the polysulfide cause low utilization efficiency of sulfur and fast capacity fade of the battery. To solve these problems and make the battery usable, sulfur is always combined with a conductive polymer such as PPy, CMK or a carbon matrix of CNTs or graphene. Graphene, as the basic unit for sp hybridized carbon materials, is considered as appealing carbon matrix to incorporate with sulfur for Li-S batteries. H2S is a kind of toxic gas which is urgently required to be removed effectively, while sulfur is the main element of H2S. Herein, we developed H2S as a novel and effective reducing agent for the reduction of graphene oxide, and a graphene/S hybrid can be prepared within the reduction process. The abundant oxygen groups attached on graphene oxide layers help oxidize the H2S and a homogeneous loading of S on the curly and interconnected graphene layers can be obtained as shown in Figure 1, such a structure ensures the contact between HRGO and S, which facilitates electron transfer when it is used as an electrode material. The resulting HRGO/S is further highlighted as a possible cathode of a Li-S battery, exhibiting good power performance and stability. A capacity of 683 mAh g can be retained at a current density of 2.0 A g, and a capacity of 490 mAh g can still be obtained even at 5.0 A g. The capacity retention is estimated to be about 72% (2.0 A g to 0.2 A g), which is far superior to that of a GN/S cathode (meltdiffusion of S with low-temperature thermally exfoliated graphene powder). It also shows relatively stable cyclic ability, and the capacity retention achieves 71% after 100 cycles with Coulombic efficiency around 94%, which is higher than those of the GN/S (65% retention after 50 cycles and a Coulombic efficiency around 88%) that may be because of the interaction between the S and the graphene surface derived from chemical reaction process in preparation.

3D Hierarchically Interconnected Porous Graphene Containing Sulfur for Stable High Rate Li-S Batteries

Porous Three-Dimensional Reduced Graphene Oxide for High-Performance Lithium-Sulfur Batteries

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Sulfur-infiltrated Graphene-Based Layered Porous Carbon Cathodes for High-Performance Lithium-Sulfur Batteries.

Ternary Graphene/sulfur/sio2 Composite As Stable Cathode for High Performance Lithium/sulfur Battery

Hierarchical High‐Porosity Graphene Oxide‐Porous Carbon/Sulfur Composite with Sodium Chloride As Temporary Space Holders for High‐Performance Lithium‐Sulfur Batteries

Fe3O4-Decorated Porous Graphene Interlayer for High-Performance Lithium-Sulfur Batteries

Hierarchical nitrogen-doped porous graphene/reduced fluorographene/sulfur hybrids for high-performance lithium-sulfur batteries.

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

Three-Dimensionally Hierarchical Graphene Based Aerogel Encapsulated Sulfur as Cathode for Lithium/Sulfur Batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Mesoporous N-doped graphene prepared by a soft-template method with high performance in Li-S batteries.

Hierarchical Porous Graphene Bubbles As Host Materials For Advanced Lithium Sulfur Battery Cathode

High Sulfur Loading Composite Wrapped By 3d Nitrogen-Doped Graphene As A Cathode Material For Lithium-Sulfur Batteries

Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries

Self-assembled N-graphene nanohollows enabling ultrahigh energy density cathode for Li-S batteries

Free-Standing Graphene-Based Porous Carbon Films With Three-Dimensional Hierarchical Architecture For Advanced Flexible Li-Sulfur Batteries

Three-dimensional Graphene Framework with Ultra-High Sulfur Content for a Robust Lithium–sulfur Battery

The Reduction of Graphene Oxide by H2s and Its Potential Application in Li-S Battery

3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels As A Cathode for Advanced Lithium Sulfur Batteries