Abstract:Summary With the development of modern industries,drinking water in residential area and public building were supplied by water distribution systems.The drinking water distribution system is the final step from water plants to the users,and therefore is essential to assure drinking water safety for customers.Previous studies confirmed that many bacteria in the drinking water distribution systems existed as biofilm,which could induce corrosion and scaling of the pipe walls,reduce the water quality and water-carrying capacity of the pipelines. Moreover,as the pathogens growing in the biofilms transferred in the pipelines,the risks caused by these microorganisms would increase.Vibrio species is an estuarine bacterium widely distributed in the natural aquatic environment around the world.Among the discovered 76 kinds ofVibrio species,at least 12 kinds have pathogenic effect on human,and often result in severe diarrhea and dehydration.We found the Vibrio species in our previous survey of pathogenic bacteria in biofilm,indicating that the residents were at potential risk from Vibrio species. Therefore,the effect of pipe materials,pipe ages,and pipe diameters on amount of Vibrio species in biofilm of drinking water distribution system was necessary to investigate. In this study,1 2 biofilm samples were collected from the drinking water distribution system in east China. Vibrio was isolated using thiosulfate-citrate-bile salts-sucrose(TCBS)agar medium and was identified according to their biochemical reaction characteristics using biochemical identification kit for Vibrionaceae GYZ-9V.The amounts of total bacteria were determined by a spread-plating method according to the Ministry of Health StandardExaminationMethodsforDrinkingWater(2006).Samples and their dilutions were spread on Petri dishes with nutrient agar medium.Analysis of variance (ANOVA) by a least significant difference test was used to compare Vibrio counts from different pipe materials,ages and diameters. The results showed that Vibrio species could be detected in nodular cast iron,galvanized steel and stainless steel clad pipes,but not in plastic pipe.TheVibrio species amount on the biofilm attached to the nodular cast iron pipe(212±39.40 CFU/cm2)was significantly higher than those attached to the galvanized steel pipe(4.85±1.03 CFU/cm2)and stainless steel clad pipe(0.66±0.21 CFU/cm2).However,the rank of total bacteria amount was galvanized steel pipe > nodular cast iron pipe ≈ plastic pipe > stainless steel clad pipe.Pipe age had little influence on Vibrio amounts from galvanized steel and nodular cast iron pipes.Nodular cast iron pipe with a nominal diameter of 200 mm had the highest amount ofVibrio species(2.65×103 ±204 CFU/cm2),followed by 150 mm(212±39.40 CFU/cm2)and 300 mm(44.20±6.88 CFU/cm2),and the tendency of total bacteria amount was similar with Vibrio species. In conclusion, contamination from Vibrio species with varying levels is observed in nodular cast iron, galvanized steel and stainless steel clad pipes,but not in plastic pipe.The different pipe materials,especially nodular cart iron pipe,have strong influence on Vibrio species amount in biofilm from drinking water distribution system;therefore, the potential risks of Vibrio species from nodular cast iron pipe should be taken into consideration while laying the pipelines.

[Methods of Enumeration of Bacteria in Drinking Water].

Comparing the Effects of Two Culture Methods to Determine the Total Heterotrophic Bacterial Colony Count in Hospital Purified Water

Survey of Pathogenic Bacteria of Biofilms in a Metropolitan Drinking Water Distribution System

Occurrence and Quantification of Culturable and Viable but Non-Culturable (VBNC) Pathogens in Biofilm on Different Pipes from a Metropolitan Drinking Water Distribution System.

Comparison of methods for the enumeration of coliphages in 100 mL water samples

Effects of drinking water distribution system on Vibrio amounts in biofilm

Influence of microbial community on iron release under stagnation condition in drinking water systems

A new medium for the enumeration and subculture of bacteria from potable water

Feasibility of Plate-Streaking Method in Monitoring Total Bacteria Counts in Dental Unit Waterlines

A Rapid Total Bacteria Count Method using Nanoparticle Conjugated with Aptamer for Water Quality

Direct Microscopy of Raw Milk Bacteria Count Methodology

Analysis of the Bacterial Communities Associated with Different Drinking Water Treatment Processes.

Bacterial analysis in the water samples from the seacoast of Zhejiang Province

Heterotrophic Plate Count for Bottled Water Safety Management

Biological Stability in Drinking Water: A Regression Analysis of Influencing Factors

Investigation on Growth Characteristics of Iron Bacteria in Drinking Water Distribution Systems of a City

Comparison of plate counting with flow cytometry, using four different fluorescent dye techniques, for the enumeration of Bacillus cereus in milk

Application of miniaturized most probable number method for bacterial detection in water samples: detection of multi-drug-resistant Ralstonia insidiosa in drinking water

Comparison of PetrifilmTM AC and Pour plate techniques used for the heterotrophic aerobic bacterial count in water

The Effect of ATP Bioluminescenc Method on Determination of Total Bacteria Number and the Study of Warning Thresholds in Water

Comparison of Activity Between Attached Bacteria and Suspended Bacteria in Drinking Water Distribution System