Abstract:In order to correct the measurement error caused by a glass medium in high-temperature deformation measurement, we take a glass medium as a part of the camera calibration model. Based on photogrammetry technology and digital image correlation, a binocular camera calibration method in a complex environment is proposed and applied to high-temperature deformation measurements. Firstly, aiming at the calibration difficulty caused by the poor image quality in complex environments, the camera imaging model with distortion correction is adopted to achieve binocular camera calibration by bundle adjustment camera calibration method, which improves the success rate and stability of calibration. Secondly, to solve the problem of low calibration accuracy of binocular cameras in complex environments, the influence of lens focal length, ambient light interference and the distance between glass and camera on the calibration results are analyzed, and the optimal calibration parameters are given, so that the calibration reprojection error is reduced from 0.832 pixels to 0.132 pixels. Finally, the measurement error of the calibration method with and without glass is compared by using the measurement environment with a glass medium, which proves that this method can greatly reduce the measurement error. The test results show that this method can effectively reduce the measurement error of a displacement field caused by glass medium in a high-temperature environment. The maximum decrease of measurement error of the displacement field in the X, Y and Z axes is 70.16%, 76.51% and 40.05%, respectively. The method in this paper can achieve high-precision camera calibration in complex environments, and has good calibration stability. It is an effective way of realizing accurate measurement of high-temperature deformation.

Experimental Investigation of the Systematic Error on Photomechanic Methods Induced by Camera Self-Heating

Image Stabilization Using Motion Estimation and Micro-mechanical Compensation

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Investigation into effect of thermal expansion on thermally induced error of ball screw feed drive system of precision machine tools

Experiment-based Thermal Error Modeling Method for Dual Ball Screw Feed System of Precision Machine Tool

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Optomechanical industrial-level camera modifications forrepeatable thermal image drift

Thermal error analysis and compensation in structured light system by virtual-point-based method

Research on the Thermal Error of the 3D-Coordinate Measuring Machine Based on the Finite Element Method

Modeling and Compensation of Positioning Error in Micromanipulation

FPN Modeling and Model-Based Correction for Shutter-Less Uncooled Bolometric Imagers

Research on Testing Errors of Image Measuring Instrument

Improving Measurement Accuracy of Deep Hole Measurement Instruments through Perspective Transformation

Thermal design and experimental verification of the space ultraviolet wide field of view multi-channel scanning imager

Temperature Drift and Compensation in Stereo Visual Odometry

A Novel Error Model of Optical Systems and an On-Orbit Calibration Method for Star Sensors.

Error Correction of Glass Mediums in High-Temperature Digital Image Correlation Deformation Measurement

Error analysis of high speed photography in measuring kinematic parameter of artillery

Thermally induced positioning error modelling and compensation based on thermal characteristic analysis

Assessment and Improvement of Distance Measurement Accuracy for Time-of-Flight Cameras