Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

Error analysis of high speed photography in measuring kinematic parameter of artillery

Study on the Analysis for Error in Triangular Laser Measurement and the Method of Improving Accuracy

Some Applications of Ccd Rapid-Changing-Frequency High Speed Videography System

Data Processing Method of Time-of-flight 3D Imaging Camera

Accuracy Analysis for Digital Boresighting of Aircraft Gun

Error Analysis of Spherical Scanning Mechanism Used for Surface Defects Detection

Analysis of the Accuracy Potential of a Stereo High-Speed Camera System in 3D Measurements in Highly Dynamic Experiments

Vibration reduction performance of an arc tripod structure for firing accuracy improvement

Linear CCD and image-subtraction analysis to detect projectile motion in real time

Single-event-camera-based 3D Trajectory Measurement Method for High-Speed Moving Targets

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector

Optical system error analysis and calibration method of high-accuracy star trackers.

High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications

Measurement of Tiny Displacement with Fast Sampling by A Heterodyne Interferometer and Error Analysis

A Theoretical and Empirical Error Analysis of Mobile 3d Data Acquisition System

A Numerical Simulation Procedure for Evaluating the Accuracy of 3-Dimensional Photogrammetric Models and Its Application to Geometric Parameters of Discontinuities in Rock Masses

Warhead fragments motion trajectories tracking and spatio-temporal distribution reconstruction method based on high-speed stereo photography

Error Analysis and Accuracy Optimization for the Hand-eye Calibration of Line Structured Light

Research on Improving Artillery Firing Accuracy by Using Meteorological Data along Ballistic Trajectory for Artillery Firing

THE ERROR ANALYSIS OF FIT METHOD TO UNDERWATER GUN'S PROJECTILE VELOCITY