Abstract:The p-n tandem design of a sensitized solar cell is a novel concept holding the potential to overcome the efficiency limitation of conventional single-junction sensitized solar cells. Significant improvement of the photocurrent density (J(sc)) of the p-type half-cell is a prerequisite for the realization of a highly efficient p-n tandem cell in the future. This study has demonstrated effective photocathodes based on novel organometal halide perovskite-sensitized mesoporous NiO in liquid-electrolyte-based p-type solar cells. An acceptably high J(sc) up to 9.47 mA cm(-2) and efficiency up to 0.71% have been achieved on the basis of the CH3NH3PbI3/NiO solar cell at 100 mW cm(-2) light intensity, which are significantly higher than those of any previously reported liquid-electrolyte-based p-type solar cells based on sensitizers of organic dyes or inorganic quantum dots. The dense blocking layer made by spray pyrolysis of nickel acetylacetonate holds the key to determining the current flow direction of the solar cells. High hole injection efficiency at the perovskite/NiO interface and high hole collection efficiency through the mesoporous NiO network have been proved by time-resolved photoluminescence and transient photocurrent/photovoltage decay measurements. The limitation of these p-type solar cells primarily rests with the adverse light absorption by the NiO mesoporous film; the secondary limitation arises from the highly viscous ethyl acetate-based electrolyte, which is helpful for the solar cell stability but hinders fluent diffusion into the pore channels, giving rise to a nonlinear dependence of J(sc) on the light intensity.

All-solid-state Hybrid Solar Cells Based on a New Organometal Halide Perovskite Sensitizer and One-Dimensional TiO2 Nanowire Arrays.

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

All solid-state solar cells based on CH3NH3PbI3-sensitized TiO2 nanotube arrays

Organometal halide perovskites as visible-light sensitizers for photovoltaic cells.

Single Crystalline CH 3 NH 3 PbI 3 Self-Grown on FTO/TiO 2 Substrate for High Efficiency Perovskite Solar Cells

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Fabrication of TiO 2 nanorod array/semiconductor nanocrystal hybrid structure for photovoltaic applications

Novel Planar Heterostructure Perovskite Solar Cells with CdS Nanorods Array As Electron Transport Layer

Efficient mesoscopic perovskite solar cells based on the CH3NH3PbI2Br light absorber

Surface Analytical Investigation on Organometal Triiodide Perovskite

Boosting the Photocurrent Density of P-Type Solar Cells Based on Organometal Halide Perovskite-Sensitized Mesoporous Nio Photocathodes

An efficient planar-heterojunction solar cell based on wide-bandgap CH3NH3PbI2.1Br0.9 perovskite film for tandem cell application.

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Recent Progress of Lead Halide Perovskite Sensitized Solar Cells

Lead Methylammonium Triiodide Perovskite-Based Solar Cells: an Interfacial Charge-Transfer Investigation.

Efficient Inorganic Solid Solar Cells Composed of Perovskite and PbS Quantum Dots.

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Enhanced photovoltaic performance of perovskite CH₃NH₃PbI₃ solar cells with freestanding TiO₂ nanotube array films.

Efficient planar heterojunction solar cell employing CH3NH3PbI2+xCl1−x mixed halide perovskite utilizing modified sequential deposition

Non‐Fullerene Molecules: Hybrid Perovskite Quantum Dot/Non‐Fullerene Molecule Solar Cells with Efficiency Over 15% (Adv. Funct. Mater. 27/2021)

Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells