Abstract:Organic photovoltaics and halide perovskite solar cells are both solution-processable third-generation photovoltaic devices (PVs) attracting enormous research attention. In this study, we demonstrate a hybrid organic and perovskite PV device by mixing all-inorganic CsPbI<sub>3</sub> quantum dots (QDs) into the conventional organic bulk heterojunction active layer of PBDB-T:IT-M. It is found that the charge transfer properties between QDs and organic donor/acceptor interfaces can be fine-tuned with the size modulation and the heterovalent bismuth (Bi) doping of perovskite QDs, leading to an increase in open-circuit voltage. In addition, the incorporation of perovskite QDs with different sizes could effectively modify the nanoscale bulk heterojunction morphology toward more efficient charge collection and thus a higher fill factor. The photocurrent of the devices can also be improved through Rayleigh scattering and light absorption of the QDs. As a result, a noticeable enhancement in device performance has been achieved by the PBDB-T:IT-M with 10 nm Bi-doped CsPbI<sub>3</sub> QD device. This work provides one feasible route to fine-tune the energy level alignment and nanophase separation by integrating these two promising PV materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02292?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02292</a>.Synthesis and characterization details, device fabrication, and UV–vis, XRD, FTIR, EQE, SEM, AFM, GIWAXS, GISAXS, XPS, and UPS results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02292/suppl_file/ae0c02292_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Non‐Fullerene Molecules: Hybrid Perovskite Quantum Dot/Non‐Fullerene Molecule Solar Cells with Efficiency Over 15% (Adv. Funct. Mater. 27/2021)

Hybrid Perovskite Quantum Dot/Non‐Fullerene Molecule Solar Cells with Efficiency Over 15%

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

High‐Efficiency Perovskite Quantum Dot Hybrid Nonfullerene Organic Solar Cells with Near‐Zero Driving Force

A Small‐Molecule “charge Driver” Enables Perovskite Quantum Dot Solar Cells with Efficiency Approaching 13%

Conjugated Polymer–inorganic Semiconductor Hybrid Solar Cells

Hybrid Quantum Dot/Organic Heterojunction: A Route to Improve Open-Circuit Voltage in PbS Colloidal Quantum Dot Solar Cells

Hybrid Tandem Quantum Dot/organic Photovoltaic Cells with Complementary Near Infrared Absorption.

Efficient Hole Transfer via CsPbBr 3 Quantum Dots Doping toward High‐Performance Organic Solar Cells

Size Modulation and Heterovalent Doping Facilitated Hybrid Organic and Perovskite Quantum Dot Bulk Heterojunction Solar Cells

High-Performance Perovskite Quantum Dot Solar Cells Enabled by Incorporation with Dimensionally Engineered Organic Semiconductor

Mediating Colloidal Quantum Dot/Organic Semiconductor Interfaces for Efficient Hybrid Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction (adv. Energy Mater. 35/2022)

Efficiency enhancement of organic solar cells by inserting PbS quantum dots film as the infrared absorption layer

Nonradiative Energy Transfer Enables a Hv < E G Response of Perovskite Quantum Dots in Si-Based Inorganic-Organic Hybrid Solar Cells

Efficient hybrid colloidal quantum dot/organic solar cells mediated by near-infrared sensitizing small molecules

Perovskite bridging PbS quantum dot/polymer interface enables efficient solar cells

Nonradiative Energy Transfer Enables a hv < Eg Response of Perovskite Quantum Dots in Si-Based Inorganic-Organic Hybrid Solar Cells

Hybrid PbS Quantum-Dot-in-Perovskite for High-Efficiency Perovskite Solar Cell.

Synergistic doping of fullerene electron transport layer and colloidal quantum dot solids enhances solar cell performance.

Band-Aligned Polymeric Hole Transport Materials for Extremely Low Energy Loss α-CsPbI3 Perovskite Nanocrystal Solar Cells