Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

The Novel Measurement Method of Liquid Level and Density in Airtight Container.

Measurement of Particle Materials and Liquid Level

A Novel Ultrasonic Method for Liquid Level Measurement Based on the Balance of Echo Energy.

A Method for Void Fraction Measurement of Bubble/slug Flow in Small Channels Based on Contactless Impedance Detection

A Novel Radius Measurement Method for Vertical Oil Tank Based on Laser Tracking and Wall-Climbing Robot.

Liquid Level Measurement Model Outside of Closed Containers Based on Continuous Sound Wave Amplitude

Precise Measurement of Liquid Petroleum Tank Volume Based on Data Cloud Analysis

A Liquid Level Positioning System For Non-Metal Containers Based on Localized Spoof Surface Plasmon

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Research on density measurement of liquefied natural gas storage tank based on computational fluid dynamics

Measuring the Oil Weight of Crude Oil Storage Tanks Based on the Density Method

Nondestructive In-situ Permittivity Measurement of Liquid Within a Bottle Using an Open-Ended Microwave Waveguide

The non-contact precision measurement and noise reduction method for liquid volume metrology

Oil-water two-phase flow measurement based on differential pressure

Study on Internal Electro-optical Measuring Method For Horizontal Tank Volume Measurement

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Precise Measurement on Form of Horizontal Tank Used for Liquid Volume Metrology by Laser Scanning Method

A New Proposal Of Multi-Functional Liquid Level Meter

Method for measuring bubble volume in liquid environment

Measurement System Design of Tank Liquid Level Based on Thermal Imager

Ultrasonic liquid level detection method based on the variation of reflected energy on the inner wall of a container