Abstract:Background: Proton minibeam radiation therapy (pMBRT) can deliver spatially fractionated dose distributions with submillimeter resolution. These dose distributions exhibit significant heterogeneity in both depth and lateral directions. Accurate characterization of pMBRT doses requires dosimetry devices with high spatial resolution and a wide dynamic range. Furthermore, the dependency of dosimetric measurements on Linear Energy Transfer (LET), as observed in conventional proton therapy, is also present in pMBRT depth dose measurements. Purpose: This work demonstrates the process of performing comprehensive dosimetric measurements to characterize the pMBRT collimator on a clinical single-gantry proton machine, utilizing commercially available dosimetry devices. Methods: The minibeam collimator is designed to be mounted on the clinical nozzle as a beam-modifying accessory. Three collimators, each with a slit opening of 0.4 mm, are thoroughly evaluated. The center-to-center (c-t-c) distances of the slits for these collimators are 2.8 mm, 3.2 mm, and 4.0 mm, respectively. High spatial resolution dosimetry devices are essential for PMBRT dose characterizations. To meet this requirement, two-dimensional (2D) dose measurement devices, Gafchromic films, are used to measure lateral profiles at various depths. Films are also used for depth dose profile measurements in solid water. Additionally, high-resolution point dose detectors, microDiamond, and Razor diode detectors are employed for lateral profile measurements at various depths. Percent depth dose (PDD) measurements of pMBRT in solid water, with various proton energies, collimators, and air gaps, are performed using Gafchromic films. The film's LET dependency for proton beams is corrected to ensure accurate pMBRT PDD measurements. The Monte Carlo simulation tool TOPAS is utilized to compare and validate all experimental measurements. Results: At depths where LET is not a concern, film dose measurements were consistent with microDiamond and Razor diode point measurements. The point detectors need to be orientated with the thin side aligned to the incoming beam. Comparison of the lateral dose profiles extracted from TOPAS simulations, films, microDiamond, and Razor diode detectors shows a passing rate exceeding 98% in 1D gamma analysis at 3% 0.1 mm criteria.However, when the microDiamond detector is orientated to face the pMBRT beam, its spatial resolution may not be sufficient to capture the peak and valley dose accurately. Nevertheless, an accuracy within 2% can still be achieved when comparing the average dose. The PDD measurements show that the peak valley dose ratio (PVDR) of pMBRT can be altered at different depths with different air gaps using the same collimator or different collimators of different c-t-c distances. Conclusion: Our study demonstrates that comprehensive dose measurements for pMBRT can be conducted using standard clinical dose measurement devices. These measurements are indispensable for guiding and ensuring accurate dose reporting in pre-clinical studies using the pMBRT technique.

[Dosimetry of Translating Scanning Beam Irradiation].

Evaluation of coefficients to derive organ and effective doses from cone-beam CT (CBCT) scans: a Monte Carlo study

The influence of beam delivery uncertainty on dose uniformity and penumbra for pencil beam scanning in carbon-ion radiotherapy

Detector-specific correction factors in radiosurgery beams and their impact on dose distribution calculations

Dosimetry of a novel converging X‐ray source for kilovoltage radiotherapy

Impact of Different Synchrotron Flattop Operation Modes on 4D Dosimetric Uncertainties for Scanned Carbon-Ion Beam Delivery

Computational dose visualization & comparison in total skin electron treatment suggests superior coverage by the rotational versus the Stanford technique

A Fractionated X-ray Total Body Irradiation Technique with Patients Lying on Side and in Vivo Dosimetry Analysis

Technical note: A method to evaluate the effect of scanning beam delivery error on 3D dose and its utilization on carbon ion radiotherapy for prostate cancer

Comprehensive dosimetric commissioning of proton minibeam radiotherapy on a single gantry proton system

Design and characterisation of a minibeam collimator utilising Monte Carlo simulation and a clinical linear accelerator

Variation of Patient Imaging Doses with Scanning Parameters for Linac-Integrated Kilovoltage Cone Beam CT

"Zero-field" dose data for 60Co and other high-energy photon beams in water

Simulation, Visualization and Dosimetric Validation of Scatter Radiation Distribution under Fluoroscopy Settings

Effect of Diode-Based Transmission Detector Measurement on Dose Perturbation during Delivery of 6MV Photon

Study on Radiation Dose in Single-source and Triple-source Helical Cone-beam Scanning

Towards quantitative in vivo dosimetry using x‐ray acoustic computed tomography

Variation of patient imaging doses with scanning parameters for linac-integrated kilovoltage cone beam CT.

Dosimetric validation for prospective clinical trial on GRID collimator‐based spatially fractionated radiation therapy: Dose metrics consistency and heterogeneous pattern reproducibility

Clinical dose assessment for scanned carbon-ion radiotherapy using linear energy transfer measurements and Monte Carlo simulations

Charateristic of dose distribution and its clinical application in stereotactic radiotherapy practice