Abstract:MXenes have attracted great attention for their potential applications in electrochemical and electronic devices due to their excellent characteristics. Traditional sound sources based on the thermoacoustic effect demonstrated that a conductor needs to have an extremely low heat capacity and high thermal conductivity. Hence, a thin MXene film with a low heat capacity per unit area (HCPUA) and special layered structure is emerging as a promising candidate to build loudspeakers. However, the use of MXenes in a sound source device has not been explored. Herein, we have successfully prepared sound source devices on an anodic aluminum oxide (AAO) and a flexible polyimide (PI) substrates by using the prepared Ti3C2 MXene nanoflakes. Due to the larger interlayer distance of MXene, the MXene-based sound source device has a higher sound pressure level (SPL) than that of graphene of the same thickness. High-quality Ti3C2 MXene nanoflakes were fabricated by selectively etching the Ti3AlC2 powder. The as-fabricated MXene sound source device on an AAO substrate exhibits a higher SPL of 68.2 dB (f = 15 kHz) and has a very stable sound spectrum output with frequency varying from 100 Hz to 20 kHz. A theoretical model has been built to explain the mechanism of the sound source device on an AAO substrate, matching well with the experimental results. Furthermore, the MXene sound source device based on a flexible PI substrate has been attached to the arms, back of the hand, and fingers, indicating an excellent acoustic wearability. Then, the MXene film is packaged successfully into a commercial earphone case and shows an excellent performance at high frequencies, which is very suitable for human audio equipment.

Thermoacoustic Sound Generation from Monolayer Graphene for Transparent and Flexible Sound Sources

Flexible and Transparent Graphene-Based Loudspeakers

A Large-Scale and Low-Cost Thermoacoustic Loudspeaker Based on Three-Dimensional Graphene Foam.

Flexible Graphene Sound Device Based On Laser Reduced Graphene

Wafer-Scale Flexible Graphene Loudspeakers

Graphene-on-paper Sound Source Devices.

Flexible and large-area sound-emitting device using reduced graphene oxide

A Flexible 360-Degree Thermal Sound Source Based On Laser Induced Graphene

Graphene-Based Thermoacoustic Sound Source.

Graphene-Based Fully Transparent Thin Film Surface Acoustic Wave Devices for Sensing and Lab-on-Chip Applications

High-performance Sound Source Devices Based on Graphene Woven Fabrics

Flexible, Stretchable, Transparent Carbon Nanotube Thin Film Loudspeakers

BROADBAND AND FAST RESPONSE THERMOPHONE USING GRAPHENE NANOFILM

A flexible, transparent and ultrathin single-layer graphene earphone

Graphene Aerogels for Ultrabroadband Thermoacoustics

A Novel Thermal Acoustic Device Based on Porous Graphene

Static behavior of a graphene-based sound-emitting device.

Flexible Two-Dimensional Ti3C2 MXene Films As Thermoacoustic Devices.

Stretchable Ink Printed Graphene Device with Weft-Knitted Fabric Substrate Based on Thermal-Acoustic Effect

Research on Frequency Doubling Effect of Thermoacoustic Speaker Based on Graphene Film

Mini-review: Novel Graphene-based Acoustic Devices