Abstract:Abstract Flexible human–machine interfaces show broad prospects for next-generation flexible or wearable electronics compared with their currently available bulky and rigid counterparts. However, compared to their rigid counterparts, most reported flexible devices (e.g., flexible loudspeakers and microphones) show inferior performance, mainly due to the nature of their flexibility. Therefore, it is of great significance to improve their performance by developing and optimizing new materials, structures and design methodologies. In this paper, a flexible acoustic platform based on a zinc oxide (ZnO) thin film on an aluminum foil substrate is developed and optimized; this platform can be applied as a loudspeaker, a microphone, or an ambient sensor depending on the selection of its excitation frequencies. When used as a speaker, the proposed structure shows a high sound pressure level (SPL) of ~90 dB (with a standard deviation of ~3.6 dB), a low total harmonic distortion of ~1.41%, and a uniform directivity (with a standard deviation of ~4 dB). Its normalized SPL is higher than those of similar devices reported in the recent literature. When used as a microphone, the proposed device shows a precision of 98% for speech recognition, and the measured audio signals show a strong similarity to the original audio signals, demonstrating its equivalent performance compared to a rigid commercial microphone. As a flexible sensor, this device shows a high temperature coefficient of frequency of −289 ppm/K and good performance for respiratory monitoring.

A Flexible 360-Degree Thermal Sound Source Based On Laser Induced Graphene

Flexible Graphene Sound Device Based On Laser Reduced Graphene

A Large-Scale and Low-Cost Thermoacoustic Loudspeaker Based on Three-Dimensional Graphene Foam.

Flexible and large-area sound-emitting device using reduced graphene oxide

A Novel Thermal Acoustic Device Based on Porous Graphene

Graphene-on-paper Sound Source Devices.

Laser-Induced Graphene Based Flexible Electronic Devices

Wafer-Scale Flexible Graphene Loudspeakers

Thermoacoustic Sound Generation from Monolayer Graphene for Transparent and Flexible Sound Sources

A reduced graphene oxide sound-emitting device: A new use for Joule heating

An Intelligent Artificial Throat with Sound-Sensing Ability Based on Laser Induced Graphene

High-performance Sound Source Devices Based on Graphene Woven Fabrics

Flexible multifunctional platform based on piezoelectric acoustics for human–machine interaction and environmental perception

Static behavior of a graphene-based sound-emitting device.

Stretchable Ink Printed Graphene Device with Weft-Knitted Fabric Substrate Based on Thermal-Acoustic Effect

Flexible and Transparent Graphene-Based Loudspeakers

Graphene-Based Thermoacoustic Sound Source.

Intelligent Flexible Pressure Sensors with Improved Sensing Range and Sensitivity Based on 3D-Graphene Patterning Induced by UV Laser.

Nomex paper-based double-sided laser-induced graphene for multifunctional human-machine interfaces

Multifunctional Flexible Sensor Based on Laser-Induced Graphene

Flexible and wearable acoustic wave technologies