Abstract:In this paper, firstly the mesoscopic elemental mechanical model for elastic damage is developed and implemented into the rock and tool interaction code (R-T2D). Then the failure processes of a heterogeneous rock specimen subjected to a wide variety of confining pressures (0–80 MPa) are numerically investigated using the R-T2D code. According to the simulated results, on the one hand, the numerical simulation reproduced some of the well-known phenomena observed by previous researchers in triaxial tests. Under uniaxial compression, rock failure is caused by a combination of axial splitting and shearing. Dilatancy and a post-failure stage with a descending load bearing capacity are the prominent characteristics of the failure. As the confining pressure increases, the extension of the failed sites is suppressed, but the individual failure sites become dense and link with each other to form a shear fracture plane. Correspondingly, the peak strength, the residual strength and the shear fracture plane angle increase, but the brittleness decreases. When the confining pressure is high enough, the specimen behaves in a plastic manner and a narrow shear fracture plane leads to its failure. The prominent characteristics are volume condensation, ductile cataclastic failure, and a constant load bearing capacity with increasing strain. On the other hand, the numerical simulation revealed some new phenomena. The highest microseismicity events occur in the post-failure stage instead of the maximal stress, and most of the microseismicity energies are released in the failure localization process. As the confining pressure increases, the microseismicity events in the non-linear deformation stage increase dramatically and the ratio between the energies dissipated at the non-linear deformation stage and those dissipated in the whole loading process increases correspondingly. Therefore, it is concluded that the developed mesoscopic elemental mechanical model for elastic damage is able to reproduce accurately the failure characteristics in loading rock specimens under triaxial conditions, and the numerical modelling can furthermore obtain some new clarifications of the rock fracture process.

Development of a ReaxFF reactive force field for ettringite and study of its mechanical failure modes from reactive dynamics simulations.

Deformation and Failure Processes of Kaolinite under Tension:Insights from Molecular Dynamics Simulations

Development and Validation of a General-Purpose ReaxFF Reactive Force Field for Earth Material Modeling.

Supporting information for “ Understanding of Deformation Mechanism and Mechanical Characteristics of Cementitious Mineral analogues From First Principles and Reactive Force Field Molecular Dynamics ”

Molecular simulation of the structure and mechanical properties of Al(Fe)–ettringite

Atomic-scale modelling of elastic and failure properties of clays

Development and application of ReaxFF methodology for understanding the chemical dynamics of metal carbonates in aqueous solutions

Atomic-scale Identification of Defects in Alite

Ettringite formation in lime and cement-stabilized clay

ReaxFF-lg: Correction of the ReaxFF Reactive Force Field for London Dispersion, with Applications to the Equations of State for Energetic Materials

Understanding the Deformation Mechanism and Mechanical Characteristics of Cementitious Mineral Analogues from First Principles and Reactive Force Field Molecular Dynamics

Atomic-scale investigation of physical adsorption of water molecules and aggressive ions to ettringite's surfaces

Intrinsic reactivity and dissolution characteristics of tetracalcium aluminoferrite

ReaxFF reactive force field for molecular dynamics simulations of liquid Cu and Zr metals

Preferred Orientation of Ettringite in Concrete Fractures

Numerical simulation on the crystallization-induced mechanical response in hardened cement paste under external sulfate attack

A Model Investigation of the Mechanisms of External Sulfate Attack on Portland Cement Binders

A High-Pressure X-ray Diffraction Study of the Crystalline Phases in Calcium Aluminate Cement Paste

Deformation behaviour of concrete materials under the sulfate attack

Numerical studies on the failure process and associated microseismicity in rock under triaxial compression

A Novel ReaxFF Multi-Scale Method for Analyzing the Fracture Behavior of the CeO2