Abstract:Hydrocyclone separation technique has commonly been applied in engineering for solid-liquid separation. In aquaculture, since Hydrodynamic Vortex Separator (HDVS) is able to control flocs concentration effectively, the Recirculating Biofloc Technology (RBFT) has been gradually acknowledged (Zhu et al., 2016). In order to operate RBFT system at maximum performance, the removal efficiency of HDVS at different Hydraulic Retention Time (HRT) must be fully predictable. The aim of this work is to investigate the relationship between separation efficiency and HRT of HDVS applied in RBFT system, through Computational Fluid Dynamics (CFD) method. For this, a three-dimensional unsteady transient model was developed to simulate the hydrodynamics in HDVS based on the commercial software Workbenching 17.0. A Two Fluid Model (TFM) using kinetic theory of granular flow (KTGF) has been developed to describe the dense solid-liquid (flocs-water) flow field of HDVS in RBFT system. Additionally, the Reynolds averaged Navier-Stokes (RANS) equations with Reynolds stress turbulence model (RSM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. Finally, pilot-scale studies were conducted to evaluate the accuracy and precision of simulation models applied. The results indicate that the flocs removal efficiency of HDVS obtained from tests were less than that from the simulation results at three different HRTs. But it decreased with the decline of HRT both for experiment and simulation. Additionally, the CFD model proposed can enhance the fundamental understanding of the effects of HRT on separation efficiency and at the same time, probably coupled with physical experiment whenever necessary, offer a more reliable way for optimum control of HDVS under varying conditions. Based on the simulation results, the flocs management in RBFT system is briefly discussed.

Hydrodynamic Property of Internal Airlift Loop Bioreactor with Cells Immobilized Onto Ceramic Honeycomb Support(IALBR-CICHS)

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Effect of aeration mode on the performance of center‐ and annulus‐rising internal‐loop airlift bioreactors

Evaluation of Hydraulic Characteristics of A Pilot-Scale Air-Lift Internal-Loop Bioreactor

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Multiphase flow characteristics of a novel internal-loop airlift reactor

Hydrodynamic Character of Internal-Loop Airlift Reactor

Effect of internal on the hydrodynamics in external-loop airlift reactors

Hydrodynamics and mass transfer of concentric-tube internal loop airlift reactors: A review

Characteristics of three-phase internal loop airlift bioreactors with complete gas recirculation for non-Newtonian fluids

Characteristics of Bubbly Flow, Mass Transfer, and CO 2 Absorption in a Two-Stage Internal Loop Airlift Reactor Assembly with a Diamond-Shaped Guide Baffle

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation

Bubble circulation regimes in a multi-stage internal-loop airlift reactor

Investigation of hydrodynamic performance in a staggered multistage internal airlift loop reactor

Hydrodynamics and Bubble Behaviour in a Three-Phase Two-Stage Internal Loop Airlift Reactor

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Hydrodynamic Behaviors of a Bubble-Up Loop Membrane Bioreactor

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Hydrodynamics of Three-Phase Internal-Loop Airlift Reactor with Large Particles