Abstract:Heterogeneous dielectric materials such as dielectric polymer nanocomposites have attracted extensive attention because of their exceptional insulating and dielectric performance, which originates from the unique space charge dynamics associated with the various interfacial regions. However, the space charge distribution and transport in polymer nanocomposites remain elusive due to the lack of analytical methods that can precisely probe the charge profile at the nanoscale resolution. Although a few studies have explored the possibility of using scanning probe techniques for characterizing the local charge distribution, the interference from induced electrical polarization of the material has been unfortunately ignored, leading to inaccurate results. In this contribution, we report an open-loop Kelvin probe force microscopy (KPFM) method with nanoscale resolution for the direct detection of the space charge profile in dielectric polymer nanocomposites. Unlike the conventional studies where a vertical direct current (DC) voltage is applied on the sample through the probe to evoke the charge injection and transport in dielectric polymer nanocomposites, the present method is established based on a delicate electrode configuration where a lateral electric field is allowed to be applied on the sample during the KPFM test. This special testing configuration enables real-time charge injection and transport without inducing the electrical polarization of material along the vertical direction, which gives rise to clean mapping of space charges and reveals the interfacial charge trapping in polymer nanocomposites. This work provides a robust and reliable method for studying the sophisticated charge transport properties associated with the various interfacial regions in heterogeneous dielectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13669?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13669</a>.Additional notes discussing the forced Lorentz oscillator model, the A2ω signal, the surface potential difference signal ΔV, and the local CEz signal; characterizations of A2ω signals with and without lateral electric field; Aω signals with the applied lateral electric field; Vflatten signals under the positive lateral electric field; and Vflatten signals under lateral electric field at 60 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13669/suppl_file/am0c13669_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simulating and interpreting Kelvin probe force microscopy images on dielectrics with boundary integral equations.

Kelvin Probe Force Microscopy and Its Application

Surface Potential Modeling and Reconstruction in Kelvin Probe Force Microscopy

Full data acquisition in Kelvin Probe Force Microscopy: Mapping dynamic electric phenomena in real space

The enzymatic transformation of water‐insoluble reactants in nonaqueous solvents. Conversion of cholesterol to cholest‐4‐ene‐3‐one by a Ncardia sp.

Integrated Tapping Mode Kelvin Probe Force Microscopy with Photoinduced Force Microscopy for Correlative Chemical and Surface Potential Mapping

Single-Harmonic Response Open-Loop Kelvin-Probe Force Microscopy

Analytical Approach to the Local Contact Potential Difference on (001) Ionic Surfaces: Implications for Kelvin Probe Force Microscopy

Spatially Resolved High Voltage Kelvin Probe Force Microcopy: A Novel Avenue for Examining Electrical Phenomena at Nanoscale

Pulsed Force Kelvin Probe Force Microscopy-A New Type of Kelvin Probe Force Microscopy under Ambient Conditions

Dependence of Electrostatic Patch Force Evaluation on the Lateral Resolution of Kelvin Probe Force Microscopy

Nanoelectromechanics of Piezoresponse Force Microscopy

Beyond the blur: using experimentally determined point spread functions to improve scanning Kelvin probe imaging

Computing the Rcs of Dielectric Coated Objects Using Multilevel Fast Multipole Algrithm: Impedance Boudary Condition Approach

3D Imaging and Quantitative Subsurface Dielectric Constant Measurement Using Peak Force Kelvin Probe Force Microscopy (Adv. Mater. Interfaces 2/2024)

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Excluding Contact Electrification in Surface Potential Measurement Using Scanning Kelvin Probe Microscopy.

Influence of Imaging Parameters on AFM Surface Potential Measurements in Aqueous Solutions

A Path Integral Monte Carlo (PIMC) Method Based on Feynman-Kac Formula for Electrical Impedance Tomography

Combination of Direct-Forcing Fictitious Domain Method and Sharp Interface Method for Dielectrophoresis of Particles

Mapping the Space Charge at Nanoscale in Dielectric Polymer Nanocomposites