Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3><p>Selective catalytic reduction (SCR) of NO<sub>X</sub> has been the most widely used technique for the reduction of NO<sub>X</sub> emissions from combustion flue gas. MnO<sub>X</sub>/FeO<sub>X</sub> based catalysts typically can attain high NO<sub>X</sub> conversion at low temperature but inferior water vapor resistance. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3><p>A MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was synthesized by the sonicated co‐precipitation method and then wash‐coated on ceramic cordierite monoliths to form a low pressure drop monolithic catalyst suitable for high flowrate flue gas treatment conditions. The catalyst achieved above 90% NO conversion at a gas hourly space velocity (GHSV) of 30,000 h<sup>‐1</sup> over a 125‐225 °C temperature window under simulated industrial flue gas conditions. In the presence of up to 5% H<sub>2</sub>O vapor, comparable performance was retained for a reduced temperature window of ≥150 °C. In order to improve water resistance and LT‐SCR performance, an optimal 10% w/w PTFE doped MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was developed, which exhibited remarkably high performance of up to 98% NO conversion, with improved water resistance at up to 10% v/v H<sub>2</sub>O while retaining high performance from 100 °C. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3><p>Monolithic MnO<sub>X</sub>/FeO<sub>X</sub> catalyst incorporating PTFE significantly improved NO conversion and water vapour resistance due to the enhanced NH<sub>3</sub> adsorption associated with Lewis acid sites and water repellent property. These findings will provide guidance for researchers in this field to adapt F based or similar additives into the making of high performance and high water resistance catalysts either to retrofit existing catalyst synthesis procedures or reinvent a novel catalyst at scalable but economical way. </p><p>This article is protected by copyright. All rights reserved.</p></section>

A stable Cu-polyatomic-cluster catalyst: Critical for methanol reforming deNOx at mild temperature

Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Low-temperature Selective Catalytic Reduction of NOx with NH3: Exploring the Mechanism of Enhancing H2O Tolerance Through Methylation Functionalization and Structural Regulation in IPAx-Mn-BTC

Radio-frequency (RF) plasma synthesis of H-ZSM-5 supported MnOx catalysts with high catalytic activity for deNOx-SCR by propylene

Fundamental investigation on layered double hydroxides derived mixed metal oxides for selective catalytic reduction of NOx by H2

High-content graphitized N-doped carbon encapsulated Cu catalyst in aqueous phase reforming of methanol for efficient hydrogen production

Green Synthesis of a Cu/SiO2 Catalyst for Efficient H2-SCR of NO

Synthesis and characterisation of monolithic PTFE ‐modified MnO X / FeO X catalysts for selective catalytic reduction ( SCR ) of NO X at low temperature

Flexible monolithic Pt/CuO-Fe2O3/TiO2 catalysts integrated on Ti mesh for efficient NO removal via CO-SCR reaction

High Resistance of SO2 and H2O over Monolithic Mn-Fe-Ce-Al-O Catalyst for Low Temperature NH3-SCR

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Synthesis of polymetallic oxides hollow spheres with superior activity, resistance to SO2, H2O and metal poisons for low-temperature NH3‐selective catalytic reduction of NOx

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

H3pw12o40-Modified Mnox: Efficient Catalyst for Nh3-Scr of Nox

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Atomically Dispersed Ni-Based Anti-Coking Catalysts for Methanol Dehydrogenation in a Fixed-Bed Reactor

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study