Abstract:The ultra-wideband (UWB) has recently been recognized as a revived wireless technology for short-range communication and fine ranging [1]–[3]. Even though the coherent UWB receiver achieves good sensitivity and high immunity against the narrowband interference (NBI), it suffers from high power and complex design for receiver synchronization. With a simple architecture and intermittent operation, the noncoherent UWB receiver achieves high energy efficiency [3], but the performance is vulnerable to the NBI. Because of new wireless standards such as 5G NR and Wi-Fi 6, having good NBI tolerance at 5-6GHz range becomes critical for UWB transceiver systems. The NBI tolerance of only -45dBm at 6GHz is reported in a recent noncoherent transceiver [4]. In this paper, we propose a 7.25-7.75GHz UWB transceiver that achieves good NBI tolerance as well as fine ranging with following features. Firstly, the uncertain-IF architecture is employed for the UWB receiver for the first time to achieve an optimum performance between energy efficiency and NBI tolerance. Unlike the uncertain-IF wake-up receiver (WuRX) for narrowband wireless standards [5], the quality (Q) factor requirement and the design complexity for the RF filter or IF filter could be significantly relaxed. To have good image rejection, a high LO frequency of 9GHz is chosen for down conversion, so that the image frequency can be beyond 10GHz. Secondly, the transceiver employs the synchronized on-off keying (S-OOK) modulation to mitigate the baseband synchronization issue [6]. Based on the S-OOK modulation, a pulse-triggered envelope/energy detector (PT-EVED) is designed in the receiver not only to automatically define an optimum integration window for good sensitivity during the communication mode but also to provide a fine ranging resolution during the ranging mode. Thirdly, a ΔΣ time-to-digital converter (TDC) is employed to have a digital-intensive ranging demodulation with a 1b oversampled output.

3–5 GHz UWB Impulse Radio Transmitter and Receiver MMIC Optimized for Long Range Precision Wireless Sensor Networks

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A Low-Power and Flexible Energy Detection IR-UWB Receiver for RFID and Wireless Sensor Networks

Ultra Low-Power RFID Tag with Precision Localization Using IR-UWB

A 0.92/5.3nJ/b UWB impulse radio SoC for communication and localization

A 7.25-7.75Ghz 5.9mw UWB Transceiver with -23.8Dbm NBI Tolerance and 1.5cm Ranging Accuracy Using Uncertain IF and Pulse-Triggered Envelope/Energy Detection.

Low Cost and Precise Localization in a Remote-Powered Wireless Sensor and Identification System

0.15-Nj/b 3–5-Ghz IR-UWB System with Spectrum Tunable Transmitter and Merged-Correlator Noncoherent Receiver

A 9.2pj/pulse UWB-IR Transmitter with Tunable Amplitude for Wireless Sensor Tags in 0.18um CMOS

CMOS UWB IR Non-Coherent Receiver for RF-ID Applications

An Ultra Low-Power Dual-Band IR-UWB Transmitter in 130-nm CMOS

A Low Power Interference Robust IR-UWB Transceiver SoC for WBAN Applications

A non-coherent receiving solution for near field pulse UWB communication

Cmos Low-Power Analogue Baseband Circuits for a Non-Coherent Low Data Rate IR-UWB Receiver

A UWB-Based Sensor-to-Time Transmitter for RF-Powered Sensing Applications

78.8 pJ/b, 100 Mb/s Noncoherent IR-UWB Receiver for Multichannel Neurorecording Implants

3–5Ghz IR-UWB Timed Array Transmitter in 0.18μm CMOS

UWB Radio Module Design for Wireless Sensor Networks

A Flexible Energy Detection IR-UWB Receiver for RFID and WSN

A high efficiency robust IR-UWB receiver design for high data rate CM-range communications

A CMOS Ultra-Wideband Impulse Radio Transceiver for Interchip Wireless Communications