Abstract:The fabrication, operation, and characterization of a polymer-based rectilinear ion trap mass analyzer is, discussed. A novel, fast prototyping technique, stereolithography (SLA)-based fabrication, traditionally reserved for end use production parts and to fabricate master molds for rubber products, is applied here as a tool to create precise, arbitrary geometries. Taking full advantage of the SLA methodology, an open corner, polymer-based ion trap has been fabricated and tested. The use of a custom resin, Nanoform 15120 (DSM Somos, New Castle, DE), has resulted in a polymer with high heat deflection temperature and greater structural stability at higher temperatures and lower capacitance. The mass analyzer was mounted in a polymer holder and tested in a custom vacuum system using modified LCQ Duo (Thermo Fisher Corp.) electronics. The resolution, mass/charge range, and MS/ MS capabilities were examined using electrospray ionization as well as atmospheric pressure chemical ionization. In the course of this study, three traps of different sizes were fabricated, beginning with a "full size" device measuring 10 x 8 x 50 mm. The next two traps were scaled down by linear factors of a half and a third. SLA is shown to allow fabrication of light, small rectilinear ion traps, which are less expensive and have the same performance as traditional machined devices of the same size. In addition, smaller traps can be built just as easily, and they show unit mass resolution to mass 300, tandem mass spectrometry capabilities, and low power consumption.

Miniature Monolithic Rectilinear Ion Trap Arrays by Stereolithography on Printed Circuit Board

Circular Arrays of Polymer-Based Miniature Rectilinear Ion Traps

Miniature Radio Frequency Ion Trap Mass Spectrometry

Miniaturization And Geometry Optimization Of A Polymer-Based Rectilinear Ion Trap

Quadrupole ion traps and trap arrays: geometry, material, scale, performance.

Polymer-Based Ion Trap Chemical Sensor

Novel ion traps using planar resistive electrodes: implications for miniaturized mass analyzers

Ion Trapping with a Laser-written 3D Miniaturized Monolithic Linear Paul Trap for Microcavity Integration

Experimental investigation of planar ion traps

Miniature Rectilinear Ion Trap Mass Spectrometry

Industrially Microfabricated Ion Trap with 1 eV Trap Depth

Rectilinear ion trap: concepts, calculations, and analytical performance of a new mass analyzer.

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

Printed circuit board ion trap mass analyzer: its structure and performance.

Novel Linear Ion Trap Mass Analyzer Composed of Four Planar Electrodes

Heating rate and electrode charging measurements in a scalable, microfabricated, surface-electrode ion trap

(k,m)-Catalan Numbers and Hook Length Polynomials for Plane Trees

Characterization of a Serial Array of Miniature Cylindrical Ion Trap Mass Analyzers

Monolithic Microfabricated Symmetric Ion Trap for Quantum Information Processing

Simulation of a Miniature Linear Ion Trap with Half-Round Rod Electrodes

3D-Printed Micro Ion Trap Technology for Scalable Quantum Information Processing