Abstract:The fabrication, operation, and characterization of a polymer-based rectilinear ion trap mass analyzer is, discussed. A novel, fast prototyping technique, stereolithography (SLA)-based fabrication, traditionally reserved for end use production parts and to fabricate master molds for rubber products, is applied here as a tool to create precise, arbitrary geometries. Taking full advantage of the SLA methodology, an open corner, polymer-based ion trap has been fabricated and tested. The use of a custom resin, Nanoform 15120 (DSM Somos, New Castle, DE), has resulted in a polymer with high heat deflection temperature and greater structural stability at higher temperatures and lower capacitance. The mass analyzer was mounted in a polymer holder and tested in a custom vacuum system using modified LCQ Duo (Thermo Fisher Corp.) electronics. The resolution, mass/charge range, and MS/ MS capabilities were examined using electrospray ionization as well as atmospheric pressure chemical ionization. In the course of this study, three traps of different sizes were fabricated, beginning with a "full size" device measuring 10 x 8 x 50 mm. The next two traps were scaled down by linear factors of a half and a third. SLA is shown to allow fabrication of light, small rectilinear ion traps, which are less expensive and have the same performance as traditional machined devices of the same size. In addition, smaller traps can be built just as easily, and they show unit mass resolution to mass 300, tandem mass spectrometry capabilities, and low power consumption.

Polymer-Based Ion Trap Chemical Sensor

Miniaturization And Geometry Optimization Of A Polymer-Based Rectilinear Ion Trap

Circular Arrays of Polymer-Based Miniature Rectilinear Ion Traps

Novel ion traps using planar resistive electrodes: implications for miniaturized mass analyzers

Miniature Radio Frequency Ion Trap Mass Spectrometry

Miniature Monolithic Rectilinear Ion Trap Arrays by Stereolithography on Printed Circuit Board

Integration of a Liquid-Phase Ion Trap with a Miniature Mass Spectrometer.

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

Improved Miniaturized Linear Ion Trap Mass Spectrometer Using Lithographically Patterned Plates and Tapered Ejection Slit

Handheld Rectilinear Ion Trap Mass Spectrometer.

Quadrupole ion traps and trap arrays: geometry, material, scale, performance.

Miniaturization of Cylindrical Ion Trap Mass Analyzers

Miniature Rectilinear Ion Trap Mass Spectrometry

Miniature ion trap mass spectrometers: Potential for use with laser spectroscopy

Ion Trapping with a Laser-written 3D Miniaturized Monolithic Linear Paul Trap for Microcavity Integration

Liquid-Phase Ion Trap for Ion Trapping, Transfer, and Sequential Ejection in Solutions.

Performance and geometry optimization of the ceramic-based rectilinear ion traps.

Design and Performance of Digital Rectilinear Ion Trap Mass Spectrometer

Microchip Liquid-Phase Ion Trap for Online Mass Spectrometry Analysis

Miniature cylindrical ion trap mass spectrometer.

Monitoring of toxic compounds in air using a handheld rectilinear ion trap mass spectrometer.