Abstract:Wire explosion technique has been widely studied in recent years to produce nanoparticles of different materials due to the enormous outstanding characteristics of nanomaterials as well as the advantages of wire explosion technique 1 . In the wire explosion process for preparation of nanoparticles, the wire firstly melts, vaporizes and then generates a mixture of metal vapor and liquid droplets. The voltage reaches a peak amplitude and the current quickly drops because only a small amount of metal vapor ionizes at this moment. Then the metal vapor gets cooled down and starts the following growing process of nanoparticles. In this paper, following simulation is carried out with wire material of aluminum. In the first stage, the generation process of vapor particles is modeled and the relationship between the explosion temperature, resistive deposited energy, the size of the vapor particles and the parameters of the explosion is derived and compared with experimental data. We find the resistive deposited energy is below the ionization one and the size of the vapor particles at the moment of explosion increases as the explosion temperature and deposited energy increases. Base on the results of the first stage, the growing process of the metal vapor to nanoparticles is simulated by adopting nodal treatment. The three main growing process, including homogeneous nucleation, surface growth and coagulation, are investigated to predict the size distribution of nanoparticles. It shows that nuclei of small size are formed during nucleation process. The decrease of number density of vapor particles demonstrates that condensation plays a more significant role than evaporation in surface growth process. The size distributions of nanoparticles at different temperatures also demonstrate that the growing process of nanoparticles tends to be inactive when temperature becomes relatively low. The final size distribution of nanoparticles is compared with experimental data as well 2 .

Study on Characteristics of Nanopowders Synthesized by Nanosecond Electrical Explosion of Thin Aluminum Wire in the Argon Gas

Effect of Argon Gas Pressure on Nanopowders Synthesized by Electrical Explosion of Aluminum Wire

Synthesis of nanosize aluminum powders by electrical explosion of wire in the gaseous media

Effect of deposited energy of wire electrical explosion in argon on characteristics of synthesized aluminum nanopowders

Electrical explosion of aluminum wire for preparation of nanoparticles: An experimental study

Influence of Energy Deposition on Characteristics of Nanopowders Synthesized by Electrical Explosion of Aluminum Wire in the Argon Gas

Structural Characteristics of Aluminum Nanoparticles Produced by Electrical Explosion in Argon

Study of nanopowder production by gas-embeded electrical explosion of wire

Characteristics and Diffusion of Electrical Explosion Plasma of Aluminum Wire in Argon Gas

Influence of Partial Reheating on Aluminum Nanoparticles from Electrical Exploding Wires

Nanopowder Production by Gas-Embedded Electrical Explosion of Wire

Investigations on Mode Transition Mechanisms and Discharge Characteristics of Electrically Exploding Aluminum Wires in Argon Gas

Numerical Investigation on the Growth Process and Size Distribution of Nanoparticles Obtained Through Electrical Explosion of Aluminum Wire

Numerical Investigation on Nanoparticle Formation and Influence on Size Distribution in Wire Explosion Process

Spatial and Temporal Distribution Characteristics of an Exploding Aluminum Wire Immersed in Argon Gas

Nano-powder Production by Electrical Explosion of Wires

Experimental Investigations on Energy Deposition and Morphology of Exploding Aluminum Wires in Argon Gas

Effects of current rate on electrically explodingaluminum wires in argon gas<br>

Characterization of Cu-Zn Alloy Nanocrystalline Powders Prepared by Wire Electrical Explosion

Second Discharge Characteristics of Aluminum Wire Electrical Explosion under Various Argon Pressures

In Situ Synthesis of Carbon-Coated Aluminum Nanoparticles by Argon Protective Arc Ablation in the Liquid Nitrogen Environment