Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Synthesis of nanosize aluminum powders by electrical explosion of wire in the gaseous media

Study of nanopowder production by gas-embeded electrical explosion of wire

Nanopowder Production by Gas-Embedded Electrical Explosion of Wire

Nano-powder Production by Electrical Explosion of Wires

Numerical simulation of pulsed wire discharge for nano-powder production

Behavior of exploding wires

The Influence of Discharge Mode on Morphology of Al–Ni Nanoparticles Prepared by Underwater Electrical Wire Explosion

Effect of solvent and processing condition on structure and morphology of aluminum nitride nanopowders fabricated by electrical explosion of wire (EEW)

Two Different Modes Of Wire Explosion For Nano-Powder Production

Synthesis of FCC structure Fe10Co25Ni34Cu23Al8 high-entropy-alloy nanoparticles by electrical wire explosion: For electromagnetic wave absorption

Nanosize Powders of Zinc Oxide Produced by Electrical Explosion of Zinc Wires

Circuit Simulation Of The Behavior Of Exploding Wires For Nano-Powder Production

Research at Tsinghua University on electrical explosions of wires

Compositionally graded multi-principal-element alloy coating with hybrid amorphous-nanocrystalline structure by directional electrical explosion

Study on the Evolution of Wire Explosion in Ambient Gas for Nano-powder Production

Compact metal nano-powder generator of 273 MW average power and synthesis of copper nano-powder

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Exploding wire preparation of core–shell aluminum–silicon nanoparticles and characterization as energetic material

The Explosive Eletrical Characteristics Test Research on Electric Exploding Copper Wire

T0301-1-1 Fabrication of Au Nanowire Utilizing Porous Aluminum

One-Step, Catalyst-Free, Scalable in Situ Synthesis of Single-Crystal Aluminum Nanowires in Confined Graphene Space