Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Numerical simulation of pulsed wire discharge for nano-powder production

Circuit Simulation Of The Behavior Of Exploding Wires For Nano-Powder Production

Nano-powder Production by Electrical Explosion of Wires

Behavior of exploding wires

Nanopowder Production by Gas-Embedded Electrical Explosion of Wire

Study of nanopowder production by gas-embeded electrical explosion of wire

Two Different Modes Of Wire Explosion For Nano-Powder Production

Study on the Evolution of Wire Explosion in Ambient Gas for Nano-powder Production

Nanosize Powders of Zinc Oxide Produced by Electrical Explosion of Zinc Wires

Evolution of the Exploding Titanium Wire in 5-50 Kpa Ambient Gas

The Explosive Eletrical Characteristics Test Research on Electric Exploding Copper Wire

Numerical Simulation of Energy Deposition Improvements in Electrical Wire Explosion Using A Parallel Wire

Electrical Explosion Across Gas–liquid Interface: Aerosol Breakdown, Shock Waves, and Cavity Dynamics

Measuring the Evolution of Mass Density Distribution of Wire Explosion

Mass Density Evolution of Wire Explosion Observed Using X-Ray Backlight

Electrical explosion of single wire by pulsed high current

Numerical Modeling in Radio Frequency Suspension Plasma Spray of Zirconia Powders

Study on Electrical Explosion of Bare and Insulation Coated Tungsten Wires

Numerical simulation of streamer, pressure wave, and vortex induced by nanosecond pulsed surface dielectric barrier discharges

Numerical Simulation of Single Pulse Discharge Machining Insulating Ceramics with High Instantaneous Energy Density

Effect Of High-Voltage Electrode Geometry On Energy Deposition Into Exploding Wire In Vacuum