Abstract:This paper proposes a three-le1el bidirectional dc-dc converter with an auxiliary inductor for full-operation zero-voltage switching (ZVS) in high-output voltage applications. The auxiliary inductor is connected across the middle node of the split flying capacitors and the center tap of the secondary winding in the transformer. In this topology, the outer and inner switches in the three-level stage can generate two independent 50% duty-cycle square waveforms, which are used to control the current in the auxiliary inductor to extend the ZVS from no loads to full loads. Considering the phase-shift angle in three-level stage, the ZVS range of the converter is analyzed, and the modulation trajectory to maintain the full-operation ZVS range with low condition loss is proposed. A flowchart implementation can guarantee the seamless transfer in different working modes. Then, the conduction loss in the proposed converter is compared with the previous three-level bidirectional solution, which illustrates that the conduction loss in the proposed converter only increases in light loads. Finally, the experimental results verify the theoretical analyses and ZVS performance across the whole power and voltage range, and the efficiency curves demonstrate the efficiency improvement.

Magnetizing Inductance Assisted Wide Range Zvs Three-Phase Ac Link Current-Fed Dc/Dc Converter with Active-Clamp for Low Dc Voltage Applications

Universal Zero-Voltage-Switching Technique for Multi-phase AC/DC Converter

Accurately Regulated Three Output ZVS on DC-DC Converter

Zero Voltage Dual-LLC Resonant Soft Switching Converter for Super High Frequency Induction Heating Power Supplies

Coupled Inductor Based Zero-Voltage-switching Buck/boost Converter

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

A Family of Zero-Voltage-Transition Magnetic Coupling Bidirectional DC/DC Converters

A ZVS Buck/Boost Converter With Coupled-Filter-Inductor

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

Active-Clamp ZVZCS Resonant Forward DC Transformer (DCX) with Load-Adaptive ON-Time Control

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

A 1-Mhz ZVS Boost DC-DC Converter with Active Clamping Using GaN Power Transistors

Modeling and Triple-Loop Control of ZVS Grid-Connected DC/AC Converters for Three-Phase Balanced Microinverter Application

Three-Level Bidirectional DC–DC Converter with an Auxiliary Inductor in Adaptive Working Mode for Full-Operation Zero-Voltage Switching

Analysis and Design of Zero-Voltage-Switching Multiphase AC/DC Converters

ZVS Three‐phase Current‐fed Push–pull Converter Employing a Simple Active‐clamp Circuit for Voltage Step‐up Applications

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Analysis and Design for a New ZVS DC DC Converter with Active Clamping

Analysis, Design, and Experimentation of an Isolated Zvt Boost Converter with Coupled Inductors

High Efficiency and Full Range ZVS Single-Stage Semi-DAB AC-DC Converter With Improved Modulation and Variable Frequency Control

Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range