Abstract:Due to the rapid adoption of Electric Vehicles (EVs) worldwide, On-Board/Off-Board Battery Chargers are facing numerous. One challenge is charging time since petrol and diesel vehicles are charged 10 times faster than electric vehicles. A second challenge is power density especially for the on-board chargers where minimal space for installation is allocated inside the vehicles. Another challenge is the wide battery voltage range which makes it difficult to optimize the converter over the entire battery voltage range and efficiency drops when either the battery voltage is too high or too lo.. Finally, the bi-directional operation is a challenge to allow the EV to support the grid in peak periods or even standalone loads. In this paper, a 6.6 kW two-stage structure is proposed utilizing a variable dc-link voltage operation. One of the most promising challenges in high-power applications is implementing the magnetics component into Printed Circuit Boards (PCBs). PCB winding transformers are widely in use in low power applications. Compared with conventional Iitz-wire transformers, the manufacturing process is greatly simplified and the parasitic is easier to control. However, due to the limitation of high winding loss and high multi-layer PCB cost in high power applications, the transformer design with PCB winding becomes a challenge. Emerging wide-bandgap devices provide the opportunity to adopt PCB transformers into high power applications. In addition, the low inductance requirement brought by high frequency also makes possible the realization of magnetic integration in PCB transformers.

Bidirectional Cllc Resonant Dc-Dc Converter with Integrated Magnetic for Obcm Application

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

An Integrated Design of Power Converters for Electric Vehicles.

High-Frequency High-Density Bidirectional EV Charger

A High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger

Design of CRM AC/DC Converter for Very High-Frequency High-Density WBG-based 6.6kw Bidirectional On-Board Battery Charger

Magnetic Integration Structure for Two-Stage DC-DC Converters

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

Analyses and Design of a High Power Bidirectional 48V-12V DCDC Converter System for Electric Vehicle Application.

Bi-directional On-Board Charger Architecture and Control for Achieving Ultra-High Efficiency with Wide Battery Voltage Range

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Wide output voltage range EV charger based on LLC resonant topology

A High-Efficiency High-Density Three-Phase CLLC Resonant Converter With a Universally Derived Three-Phase Integrated Transformer for On-Board-Charger Application

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

Over 300kHz GaN device based resonant bidirectional DCDC converter with integrated magnetics

A Coupled Inductor Scheme for CLLC Bidirectional Converter and Optimized Current Detection Method

Integrated magnetic for LLC resonant converter

Bidirectional LLC Resonant Converter with Synchronous Control Method

Bidirectional Modular Multilevel Resonant DC Converter for MVDC and LVDC Application

Hybrid LLC Resonant Converter With Partial-Power Auxiliary Unit for Improved Performance

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger