Abstract:With the advent and development of power semiconductor switches like IGBT or MOSFET, high-speed switching devices have sprung up and sped up dynastic response of converters. However, these devices in operation will produce very large dv/dt and di/dt, which result in sever electromagnetic interference(EMI). In a variable-frequency drive(VFD) system, due to the coupling common-mode(CM) noise, communication between programmable logic controller(PLC) and VFD will be affected by CM current at the motor side if communication cables get too close to the motor ones. This paper emphatically analyzes the effect of common-mode interference on communication performance of a motor drive system. It introduces the generation mechanism of CM voltage and current at the motor side in a VFD system first and briefly illustrates how it couples to the communication cables. At the same time, some certain influence factors of CM current in communication system are respectively explained. Then it elaborates the detailed mechanism how CM current on communication cables affects the error rate which is employed to evaluate the communication quality. Besides, the numerical relationship between CM current on communication cables and the error rate is also discussed and confirmed by series of experiments. Finally, some software or hardware solutions are put forward to achieve the aim of interference suppression and decreasing the error rate when CM current on communication cables is constant.

Influence of Periodic Carrier Frequency Modulation on Low Frequency Electromagnetic Interference of Permanent Magnet Synchronous Motor Drive System.

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

The Effects and Mechanisms of Periodic-Carrier-Frequency PWM on Vibrations of Multiphase Permanent Magnet Synchronous Motors

Sinusoidal Periodic Carrier Frequency Modulation in Reducing Electromagnetic Noise of Permanent Magnet Synchronous Motor

High-frequency Modelling of Permanent Magnet Synchronous Motor with Star Connection

An Optimal Periodic Carrier Frequency PWM Scheme for Suppressing High-Frequency Vibrations of Permanent Magnet Synchronous Motors

Influence of Periodic Carrier Frequency Modulation on Inverter Loss of Permanent Magnet Synchronous Motor Drive System

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Impact of Dead Time Effect on Common Mode Electromagnetic Interference in PMSM Drives

Vibration and Noise Optimization of Variable-Frequency-Driven SPMSM Used in Compressor Based on Electromagnetic Analysis and Modal Characteristics

Influence of periodic carrier frequency modulation on stator steel core loss and rotor eddy current loss of permanent magnet synchronous motor

Application of Periodic Carrier Frequency Modulation for Harmonic and EMI Reduction in GaN-Based Motor Drive

The Mechanism for Suppressing High-Frequency Vibration of Multiphase Surface Permanent Magnet Motors via PWM Carrier Phase Shifting

Electromagnetic Noise Analysis of the PMSM Motor Caused by Carrier Frequency of the Inverter

Study of Electromagnetic Vibration Suppression for Permanent Magnet Synchronous Motors

High-frequency Model of Permanent Magnet Synchronous Motor for EMI Prediction in Adjustable Speed Drive System

Carrier Frequency Harmonic Suppression in Dual Three-Phase Permanent Magnet Synchronous Motor System Based on Periodic Frequency Modulation

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System