Abstract:Weak magnetic nondestructive testing (e.g., metal magnetic memory method) concerns the magnetization variation of ferromagnetic materials due to its applied load and a weak magnetic surrounding them. One key issue on these nondestructive technologies is the magnetomechanical effect for quantitative evaluation of magnetization state from stress–strain condition. A representative phenomenological model has been proposed to explain the magnetomechanical effect by Jiles in 1995. However, the Jiles' model has some deficiencies in quantification, for instance, there is a visible difference between theoretical prediction and experimental measurements on stress–magnetization curve, especially in the compression case. Based on the thermodynamic relations and the approach law of irreversible magnetization, a nonlinear coupled model is proposed to improve the quantitative evaluation of the magnetomechanical effect. Excellent agreement has been achieved between the predictions from the present model and previous experimental results. In comparison with Jiles' model, the prediction accuracy is improved greatly by the present model, particularly for the compression case. A detailed study has also been performed to reveal the effects of initial magnetization status, cyclic loading, and demagnetization factor on the magnetomechanical effect. Our theoretical model reveals that the stable weak magnetic signals of nondestructive testing after multiple cyclic loads are attributed to the first few cycles eliminating most of the irreversible magnetization. Remarkably, the existence of demagnetization field can weaken magnetomechanical effect, therefore, significantly reduces the testing capability. This theoretical model can be adopted to quantitatively analyze magnetic memory signals, and then can be applied in weak magnetic nondestructive testing.

Prediction and Optimization for Linearity of MTJ Magnetic Sensors Based on Single-Domain Model

A Differential Model for the Hysteresis in Magnetic Shape Memory Alloys and Its Application of Feedback Linearization

Simulation and Optimization of a Permanent Magnet for Small-sized MRI by Genetic Algorithm

Modeling the Frequency Dependence of Packaged Linear Magnetoresisitive Sensors Based on Mtj

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

Reconsideration of Nonphysical Solution in Jiles–Atherton Model for Real-Time Hysteresis Estimation

The Optimal Design of Passive Shimming Elements for High Homogeneous Permanent Magnets Utilizing Sensitivity Analysis

Linear Control of Magneto-Electric Effect with Small Electric Fields

A Nonlinear Subdomain and Magnetic Circuit Hybrid Model for Open-Circuit Field Prediction in Surface-Mounted PM Machines

A General Nonlinear Magnetomechanical Model for Ferromagnetic Materials under A Constant Weak Magnetic Field

Magnetic Field Prediction In Surface-Mounted Pm Machines With Parallel Slot Based On A Nonlinear Subdomain And Magnetic Circuit Hybrid Model

In-situ Instrumental Setup for Influence Study of Hard-axis Bias Magnetic Field on MR transfer curves of sing MTJ sensor and MTJs array sensor

Bias Magnetic Field Optimization of Longitudinal Modes Guided Wave Sensor Based on Magnetostriction

Optimum Direct Current Magnetic Bias in Ferromagnetic Phase for Improvement of Magnetoelectric Effect

Non-orthogonal two-step annealing method for linearized magnetic tunnel junction sensors

Control of sensitivity in vortex-type magnetic tunnel junction magnetometer sensors by the pinned layer geometry

Research on a theoretical model of magnetic nondestructive testing for ferromagnetic materials based on the magneto–mechanical coupling effect

A Nonlinear Rotation Correction Method for Magnetic Gradient Tensor System

Nonlinear Calibration Model of a Triple Axis Tunnel Magneto Resistance Magnetometer

Research on multi-scale hysteresis constitutive model of giant magnetostrictive materials considering multi-field coupling

Research on the Linearity of a Magnetic Fluid Micro-Pressure Sensor