Abstract:Modern terminal devices are developing towards multi-functionality and miniaturization. Antenna has become one of the bottlenecks for new generation portable devices since it cannot be easily modularized as the well-established integrated circuit. How to design an antenna covering multiple bands within a limited space is a challenge. Besides, urgent demands in increasing information capacity for modern wireless communication systems motivate the applications of multiple-input-multiple-output (MIMO) technique. For MIMO system, a crucial requirement is that each channel should be independent, which means that the antenna array should have a low correlation. This is a big challenge for antenna designers when a limited space is provided, such as portable terminal devices. In this paper, a compact planar printed antenna is presented for mobile terminals. A new terminally loading method is presented which can be used to wideband monopoles. By loading the well-designed hybrid strips on the back via two shorting pins, an additional middle band is generated. Meanwhile high-frequency band characteristics of the wideband monopole are kept invariantly. The new-type monopole is half surrounded by a long folded strip to achieve diversity patterns. Based on this, the proposed structure efficiently reduces the mutual coupling between two adjacent elements in MIMO system. Based on the measured scattering parameters, a low envelope correlation coefficient below 0.25 is obtained even though the two elements are closely placed with a distance of 3 mm. The presented dual-port antenna is low cost and ease fabrication, occupying a volume of 61 mm × 16 mm × 0.8 mm without any lumped component loaded. The printed planar antenna is designed for mobile terminal applications and it covers three bands with measured Su lower than -6dB, i.e., the low-band (880-960 MHz), the middle-band (1800-2500MHz) and the high-band (3400MHz-5850MHz).

A Tri-Port MIMO Antenna Designed for Micro/Pico Cell Applications with Self-Decoupled Structure

Wideband Tri-Port MIMO Antenna with Compact Size and Directional Radiation Pattern

Neutralization Line Decoupling Tri-Band Multiple-Input Multiple-Output Antenna Design

Circular Patch MIMO Antenna with Novel Decoupling Structure

Dual-band 8-element MIMO antenna with short neutral line for 5G mobile handset

A Low-Profile Wideband Dual-Resonance Tri-Port MIMO Antenna

MIMO 5G Smartphone Antenna with Tri-Band and Decoupled Elements

Compact multi‐band eight‐element MIMO antenna with decoupled antenna pairs for 5G mobile terminal applications

Ultra-Compact Three-Port MIMO Antenna with High Isolation and Directional Radiation Patterns

A Compact Base Station MIMO Antenna Array with Miniaturized Antenna Elements

Miniaturized Broadband Dual-Polarized MIMO Antenna Array with Stable Radiation Pattern for Base Station Application

Design of Compact Multiband Mimo Antenna for the Mobile Handsets

Tri-arm MIMO array antenna pair for mobile phone applications

A Four-Port MIMO Antenna System for 5G Mobile Terminals

Closely Spaced Multi-Band MIMO Antenna for Mobile Terminals

A Quad Port MIMO Antenna Designed with an X-Shaped Decoupling Structure for Wideband Millimeter-Wave (mm-Wave) 5G FR2 New Radio (N258/N261) Bands Applications

A Miniaturized Broadband Dual-Polarized Antenna for MIMO Applications

A Miniaturized Extremely Close-Spaced Four-Element Dual-Band MIMO Antenna System With Polarization and Pattern Diversity

A Compact Planar MIMO Antenna System of Four Elements with Similar Radiation Characteristics and Isolation Structure

Closely-Located MIMO Antennas of Tri-Band for WLAN Mobile Terminal Applications

Tetraband Small-Size Printed Strip Mimo Antenna For Mobile Handset Application