Abstract:Foldable electronics, with the advantages of size compactness and shape transformation, are promising for portable and wearable applications. The challenge for realizing foldable devices is exploiting highly foldable conductive substrates free from deformation under large strain. In this work, highly foldable and degradable transparent conductive substrates were constructed using ∼20 μm ultrathin regenerated cellulose film (RCF) substrates to reduce strain, embedding silver nanowires (AgNWs) into RCFs to improve the interface binding force, as well as improving the adhesive strength of AgNWs junction. The AgNWs/RCF complex with an initial sheet resistance of 14 Ω/sq maintained an electrical conductivity after either single folding for 2000 cycles or double folding for 1000 cycles. Moreover, the difference in the electrical characteristics of AgNWs/RCF after single folding with +180 and −180° angles as well as double folding was explained to be related to the different microstructure deformations. Lastly, the first foldable polymer-dispersed liquid crystals devices using the AgNWs/RCF conductive substrates were demonstrated with 1400 cyclic stability. Our work paves the way toward realizing highly foldable transparent electrodes for foldable displays and detectors and wearable device applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.1c00247?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.1c00247</a>.Characteristic stress–strain curve for RCF (Figure S1); photographs of RCF after being immersed in different organic solvents for 24 h (Figure S2); SEM images of RCF and AgNWs/RCF after immersion in water for 12 h (Figure S3); SEM morphological image of AgNWs/glass (Figure S4); sheet resistance of AgNWs/glass and AgNWs/RCF (Figure S5); change in the resistance of AgNWs/RCF electrodes as a function of the folding cycle of single folding with +180° (Figure S6); change in the resistance of AgNWs/RCF, AgNWs-RCF, and AgNWs/CNF electrodes as a function of (a) folding cycle and (b) sticking cycle (Figure S7); photographs of the PDLC devices attached to the corner of a square box at Voff (0 V) and Von (25 V) (Figure S8); and comparison of PDLC devices on AgNWs/RCF with other reported flexible PDLC devices (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00247/suppl_file/el1c00247_si_001.pdf">PDF</a>)Dynamic process of folding the PDLC devices (Video) (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00247/suppl_file/el1c00247_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Electrical Characterization of Metal Electrodes Deposited on Flexible Polydimethylsiloxane Substrates for Folding Test

Pencil-on-paper Strain Sensor for Flexible Vertical Interconnection

Realization of Highly Foldable Conductive Substrates with 2000 Cyclic Mechanical Stability through Silver Nanowires/Cellulose Structure Design

Flexible Electronics: Ultrathin Silicon Circuits with Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper (adv. Mater. 36/2009)

Flexible PDMS-based Three-Electrode Sensor

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Facial Fabrication of Paper-Based Flexible Electronics with Flash Foam Stamp Lithography

Bending Strain and Bending Fatigue Lifetime of Flexible Metal Electrodes on Polymer Substrates

A Comparison of 90° Bending for Foldable Electronics

Nanowire Surface Fastener Fabrication on Flexible Substrate

Assembly of Surface-Mounted Devices on Flexible Substrates by Isotropic Conductive Adhesive and Solder and Lifetime Characterization

Flexible Conducting Composite Film with Reversible In‐Plane Folding–Unfolding Property

Tailoring fractal structure via 3D printing to achieve flexible stretchable electrodes based on Ecoflex/CNT/CF

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

Foldable and highly flexible transparent conductive electrode based on PDMS/ Ag NWs/PEDOT: PSS

Development of 3D CNTS interdigitated finger electrodes on flexible polymer for bending strain measurement

Parylene-MEMS Technique-Based Flexible Electronics

Evaluation on the Intrinsic Physicoelectrochemical Attributes and Engineering of Micro-, Nano-, and 2D-Structured Allotropic Carbon-Based Papers for Flexible Electronics

Development Of Patterned Carbon Nanotubes On A 3d Polymer Substrate For The Flexible Tactile Sensor Application

Flexible Metal Electrodes by Femtosecond Laser-Activated Deposition for Human–Machine Interfaces

Reliability Issues and Solutions in Flexible Electronics Under Mechanical Fatigue