Abstract:This study presents a fabrication strategy for 3D carbon microstructures using via two-photon vat photopolymerization (2p-VPP) and susceptor-assisted microwave pyrolysis (SMWP). Fabricating carbon-based electrode materials with miniaturized functional structures is pivotal for developing high-performance electrochemical microdevices. However, efficiently producing these structures in the submicron regime with desired materials is still challenging. To address this, a hybrid microfabrication strategy was developed, and 3D carbon-based microstructures with submicron resolution were successfully produced. A carbon nanotube nanocomposite photoresist (SCNT-PR1) with improved dispersibility was first prepared. After a comprehensive printability assessment, 3D microstructures with a resolution of 833 ± 54 nm were produced using 2p-VPP. Through SMWP, the microstructures were transformed into pyrolytic carbon (PyC) nanocomposite microstructures with retained geometrical features. SMWP was shown to produce PyC with a less disordered carbon atomic structure, thanks to the accelerated pyrolysis reaction under MW irradiation, when compared to pyrolysis using a conventional furnace. The resistivity was reduced by over 75% from 0.69 ± 0.13 Ω cm to 0.16 ± 0.01 Ω cm, and enhanced electrochemical performance was confirmed. The fabricated PyC nanocomposite showed a further 12% reduction in electrical resistivity and a 20% lower charge transfer resistance for the redox reaction when using SCNT-PR1 as the precursor. Overall, this hybrid fabrication strategy demonstrates the advantages of producing 3D carbon microstructures with precise control over the geometric features and enhancing electrical and electrochemical properties compared to the conventional pyrolysis method. Its potential could be extended to the fabrication of miniaturized electrochemical devices, including microelectronics and point-of-care devices.

Fabrication of High Aspect Ratio Carbon Nanotube-Carbon Composite Microstructures Based on Silicon Molding Technique

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Fabrication of predesigned 3D carbon based microstructures via two-photon vat photopolymerization and susceptor-assisted microwave post-processing

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Epitaxial Grown Carbon Nanotubes Reinforced Pyrocarbon Matrix in C/C Composites with Improved Mechanical Properties

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Fabrication and electrical integration of robust carbon nanotube micropillars by self-directed elastocapillary densification

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Synthesis and characterization of hierarchical suspended carbon fiber structures decorated with carbon nanotubes

Pyrolytic Synthesis of Conical Carbon Fibers with Carbon Nanotube Tips on Carbon Substrates

Direct Synthesis of Carbon-Rich Composite Sub-microtubes by Combination of a Solvothermal Route and a Succeeding Self-Assembly Process

Catalyzed Filling of Carbon Nanotube Array with Graphite and the Thermal Properties of the Composites

Multi-walled carbon nanotube-based carbon/carbon composites with three-dimensional network structures.

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Microstructure of the pyrocarbon in aligned carbon nanotube/carbon composites

Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites

Versatile Fabrication of Carbon Nanotube Yarn Composites by In-Situ Interfacial Polymerization of Polyetherimide

Prickly structure of multi-walled carbon nanotube reinforced mesocarbon microbead composite with high strength at elevated temperature

Homogeneous carbon nanotube/carbon composites prepared by catalyzed carbonization approach at low temperature