Abstract:This study presents a novel field-programmable gate array (FPGA)-based Time-to-Digital Converter (TDC) design suitable for high timing resolution applications, utilizing two new techniques. First, a cross-detection (CD) method is introduced that minimizes the occurrence of bubbles, which cause inaccuracy in the timing measurement of a TDC in thermometer codes, by altering the conventional sampling pattern, thereby yielding an average bin size half of its typical size. The second technique employs dual-side monitoring (DSM) of thermometer codes, including end-of-propagation (EOP) and start-of-propagation (SOP). Distinct from conventional TDCs, which focus solely on SOP thermometer codes, this technique utilizes EOP to calibrate SOP, simultaneously enhancing time resolution and the TDC's stability against changes in temperature and location. The proposed DSM scheme necessitates only an additional CARRY4 for capturing the EOP thermometer code, rendering it a resource-efficient solution. The CD-DSM TDC has been successfully implemented on a Virtex-7 Xilinx FPGA (a 28-nm process), with an average bin size of 6.1 ps and a root mean square of 3.8 ps. Compared to conventional TDCs, the CD-DSM TDC offers superior linearity. The successful measurement of ultra-high coincidence timing resolution (CTR) from two Cerenkov radiator integrated microchannel plate photomultiplier tubes (CRI-MCP-PMTs) was conducted with the CD-DSM TDCs for sub-100 ps timing measurements. A comparison with current-edge TDCs further highlights the superior performance of the CD-DSM TDCs.

A 20-ps temperature compensated Time-to-Digital Converter (TDC) implemented in FPGA

A 20-Ps Time-to-Digital Converter (TDC) Implemented in Field-Programmable Gate Array (FPGA) with Automatic Temperature Correction

A 1.15-Ps Bin Size and 3.5-Ps Single-Shot Precision Time-to-Digital Converter with On-Board Offset Correction in an FPGA

A 19 ps Precision and 170 M Samples/s Time-to-Digital Converter Implemented in FPGA with Online Calibration

Design of TDC ASIC based on Temperature Compensation

On-Chip Real-Time Correction for a 20-Ps Wave Union Time-To-Digital Converter (TDC) in a Field-Programmable Gate Array (FPGA)

A 20ps resolution wave union FPGA TDC with on-chip real time correction

Carry chain based multi-channel time-to-digital converter

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

A High-Resolution Tdc Implemented In A 90nm Process Fpga

A Study on the Effect of Temperature Variations on FPGA-Based Multi-Channel Time-to-Digital Converters

A 19.6 ps, FPGA-Based TDC With Multiple Channels for Open Source Applications

Subnanosecond Time-to-Digital Converter Implemented in a Kintex-7 FPGA

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

Cross-Detection and Dual-Side Monitoring Schemes for FPGA-Based High-Accuracy and High-Precision Time-to-Digital Converters

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A time-to-digital converter with steady calibration through single-photon detection

A Multi-chain Measurements Averaging TDC Implemented in a 40 nm FPGA

Low-cost FPGA-based multi-channel TDC with high resolution and density for time-of-flight detectors