Experiment Research Of Post-Arc Current And Cathode Spots Distribution In Medium-High Frequency Vacuum Arc
Liming Liu,Zhao Yuan,Shan Liu,Lixue Chen,Junjia He,Yuan Pan
DOI: https://doi.org/10.1063/5.0006028
IF: 2.2
2020-01-01
Physics of Plasmas
Abstract:In this paper, the breaking process of the vacuum circuit breakers is briefly described, and the main factors that influence the post-arc process are analyzed. Based on the detachable vacuum interrupter, the experimental platform of AC breaking is built, and the experiments of the post-arc current measurement and cathode spot observation are completed. The voltage and current during the period of current zero are measured, and the images of cathode spots during the arcing process are obtained. The experimental results show that at the same frequency, the post-arc current I-pac and the post-arc charge Q(pac) increase with the increase in<mml:mfrac>d id t</mml:mfrac>cz(<mml:mfrac>d id t</mml:mfrac> at current zero). Under the same conditions of<mml:mfrac>d id t</mml:mfrac>cz, I-pac and Q(pac) decrease with the increase in frequency, but both are unchanged with frequency when the frequency is high enough. With the increase in current frequency, the distribution diameter of cathode spots decreases under the condition of the same<mml:mfrac>d id t</mml:mfrac>cz value. According to the characteristics of cathode spot distribution, the metal vapor density under different conditions is calculated. Comparing the calculation results of metal vapor with the experimental results of post-arc current, the concept of metal vapor ionization is put forward. An ionization process of metal vapor after the current zero crossing occurs. The ionization of metal vapor will cause an increase in the number of electrons after the current zero crossing, which affects I-pac, Q(pac), and sheath growth.