Abstract:This paper presents a study of bioinspired wall-climbing robot (WCR) using spiny toes. The first part of the paper describes a design of a flexible spiny toe inspired by the features of a typical wall-climbing insect Serica orientalis Motschulsky's tarsal system. A simple contact model of the spiny toe is proposed by considering the contact asperities as spheres. With the help of the finite element method (FEM), the stiffness matrices as well as the directional adhesive properties of the spiny toe are obtained. A single spiny toe and its array are fabricated via fast prototyping. The adhesive forces and pull-off positions of the single toe are measured with a homebuilt apparatus using displacement-control method under different compressive deformations. As for the spiny array, the effect of the dragging path on the adhesive forces is evaluated. The results show that, both the single toe and array exhibit directional adhesive features. The value of compressive deformation of the single toe influences the contacting angle, as a consequence the directional adhesive behavior is achieved. When forming an array with numerous spiny toes, the adhesive ability is strengthened, which is also affected by the random distribution of the surface asperity height.In the second part of the paper, a prototype of bioinspired WCR is designed and fabricated based on a fully understanding of the spiny contact mechanism. The robot has two feet, each of which has spring-actuated gripper. An inchworm gait is generated according to the trajectory planning of the feet. Using the proposed spiny arrays, the robot archives scaling on vertical and inverted rough surfaces, and can also transition between vertical and ceiling walls. The performance of the prototype of bioinspired WCR shows promising in developing an intelligent and maneuverable WCR system in practical applications.

Initial design and analysis of a rough concrete building-climbing robot based on biomimetic grip claws

Design and Analysis of a Wall-Climbing Robot Based on a Mechanism Utilizing Hook-Like Claws

Grappling Claws for a Robot to Climb Rough Wall Surfaces: Mechanical Design, Grasping Algorithm, and Experiments.

Modeling Method for Wall-Climbing Robot Based on Grasping Claws

Analysis, Design and Experiments of A Rough Wall Climbing Robot Based on Grabbing Claws

Design, Simulation and Experimentation of a Biomimetic Wall-Climbing Robot with Tracked Spines

A Bio-inspired Wall-climbing Robot with Claw Wheels and Adhesive Tracks

A Bio-inspired Climbing Robot with Flexible Pads and Claws

Design and Realization of A Flexible Claw of Rough Wall Climbing Robot

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

Analysis and Optimization of the Wall-Climbing Robot with an Adsorption System and Adhesive Belts

Design and motion planning of an autonomous climbing robot with claws

Survey on Bioinspired Adhesive Methods and Design and Implementation of A Multi-Mode Biomimetic Wall-Climbing Robot.

A flexible under-driven bionic climbing robot design

Design and Study of a Biomimetic Wall-Climbing Robot with Spine Wheels and a Vacuum Suction Cup.

Design of a Quadruped Wall-Climbing Robot (WCR) with a Three-Row Opposed Gripping Mechanism

Grasping Analysis for a Biped Climbing Robot

Design And Realization Of A Bio-Inspired Wall Climbing Robot For Rough Wall Surfaces

Design of Vertical Climbing Robot with Compliant Foot

Advancing Legged Wall Climbing Robot Performance through Dynamic Contact-Integrated Climbing Model

Study Of A Bioinspired Wall-Climbing Robot: Contact Mechanism And Performance