Abstract:Control diagram of PMSG‐wind turbine converters for normal operation and LVRT conditions. The increasing integration of renewable energy sources, such as wind power, poses significant challenges for maintaining grid stability and reliability, especially under fault conditions. The issue of transient response speed of the control system during fault occurrence and clearing is one of those challenges. In this article, a fractional‐order sliding mode control (FOSMC) method is introduced for a wind energy conversion system (WECS) with a variable‐speed direct‐drive permanent magnet synchronous generator (PMSG) under both normal and fault conditions. During normal operation, the machine‐side converter (MSC) is utilized to achieve maximum power point tracking (MPPT) for the wind turbine, while the grid‐side converter (GSC) regulates the DC‐link voltage and injected reactive power. In fault conditions, such as low voltage ride through (LVRT) events mandated by grid codes, the MSC adjusts the DC‐link voltage instead of the GSC, while the GSC controls active and reactive powers. The proposed control method is compared to a conventional control system. The results demonstrate that the suggested approach offers faster dynamic response and greater robustness under both balanced and unbalanced conditions. Furthermore, by enhancing LVRT capability and reactive power injection, the proposed control method leads to smaller spikes in injected current and DC link voltage. To validate the proposed method, simulations are performed using offline MATLAB/Simulink simulation. Subsequently, the results are validated through experimental real‐time implementation.

Performance evaluation of space vector modulation controlled inverter fed variable speed wind generator during permanent fault

Variable Speed Wind Turbine Generator System with Current Controlled Voltage Source Inverter

Low voltage ride-through capability improvement of wind farms using variable speed permanent magnet wind generator

A hybrid LVRT control scheme for PMSG wind power system

A Three-Phase Programmable Voltage Sag Generator for Low Voltage Ride-Through Capability Test of Wind Turbines

Low Voltage Ride Through Capability Enhancement of Fixed Speed Wind Generator

Miscellaneous Operations Of Variable Speed Wind Turbine Driven Permanent Magnet Synchronous Generator

Transient stability enhancement of variable speed wind turbine driven PMSG with rectifier-boost converter-inverter

A Low Voltage Ride Through Control Strategy for PMSG Based on Electromechanical Energy Storage

Novel Control Design of Variable Speed Pm Wind Generator Considering Grid Code Requirement

Improved VSG Control Strategy for Wind Turbines Connected to Non-Synchronized Grid under Commutation Failure

Voltage Stability Control of Wind Farm Using PMSG Based Variable Speed Wind Turbine

Development of HVRT and LVRT Control Strategy for PMSG-Based Wind Turbine Generators

A Modified Switching Control Strategy for Low-Voltage Faults in A Permanent-Magnet Synchronous Generator Wind Turbine System

Multi-converter Operation of Variable Speed Wind Turbine Driving Permanent Magnet Synchronous Generator During Network Fault

A Novel Power-Flow Balance Lvrt Control Strategy For Low-Speed Direct-Drive Pmsg Wind Generation System

Low Voltage Ride Through Control of Large Direct-drive Wind Turbine with Multiphase PMSG and Hybrid Three-level Full-size Converters

A PMSG Wind Energy System Featuring Low-Voltage Ride-through via Mode-Shift Control

Real‐Time Fault Ride Through Capability Improvement of PMSG‐Wind Turbine Based on Robust Fractional Order Sliding Mode Control

Evaluation and Comparison of Different Methods for Improving Fault Ride-Through Capability in Grid-Tied Permanent Magnet Synchronous Wind Generators

Fault ride-through control and its impacts on wind generators in a VSC-HVDC system