Abstract:<p>A temperature insensitive air-cavity Fabry-Perot Interferometer (FPI) based on core-offset fusion (FPI-CFH) of hollow-core fibers with different inner diameters was developed. This sensing structure consists of input single mode fiber (SMF), two short sections of hollow-core fibers (HCF1 and HCF2), and a gold film. The HCF1 with an inner diameter of 70 μm is used to construct air-cavity FPI, and the HCF2 with an inner diameter of 10 μm is offset spliced with HCF1 to provide a flat reflective surface of air-cavity FPI, which can increase the reflection to enhance the fringe contrast, and meanwhile the microfluidic channel of HCF2 is used for the gas inlet. The left end-face of HCF2 is coated with gold film (the thickness of ∼50 nm) to improve the light reflectivity, so that, increasing the fringe contrast of air-cavity FPI spectrum. The experimental results show that the proposed FPI-CFH sensor has a high gas pressure sensitivity of 4.314 nm/MPa with a good linear response (the value of R-Square is 0.9987) when the gas pressure increases from 400 to 1000 kPa, and what's more, the proposed sensor has a negligible temperature cross-sensitivity (0.0051nm/℃) in the range of 20 ∼ 80 ℃ due to the structure of all-fiber and the essential characteristics of air-cavity FPI. The maximal relative error of the proposed sensor in the measurement process of gas pressure decrease is less than 1%, which illustrates the sensor has good precision and repeatability. Moreover, the proposed sensor has good stability in a long-term gas pressure testing. Therefore, the proposed FPI-CFH sensor can achieve high precision gas pressure sensing but is insensitive to the variation of temperature.</p>

Sensitivity Characteristics of Fabry-Perot Pressure Sensors Based on Hollow-Core Microstructured Fibers

Sensitivity-Enhanced Pressure Sensor With Hollow-Core Photonic Crystal Fiber

High-Sensitivity Gas Pressure Sensor Based on Fabry–Pérot Interferometer with a Side-Opened Channel in Hollow-Core Photonic Bandgap Fiber

Opto-Microfluidic Fabry-Perot Sensor with Extended Air Cavity and Enhanced Pressure Sensitivity

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

A Sensitivity-enhanced All-fiber Fabry-Perot High-pressure Sensor with a Hard-core Diaphragm

Fabricating Air Pressure Sensors in Hollow-Core Fiber Using Femtosecond Laser Pulse

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

Highly Sensitive Optical Fiber Pressure SensorBased on FPI and Vernier Effect via FemtosecondLaser Plane-by-Plane Writing Technology

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

High-sensitivity fiber temperature and pressure sensor based on fabry-perot interferometry and Vernier effect

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure

High sensitivity temperature and gas pressure sensor based on PDMS sealed tapered hollow-core fiber

Temperature insensitive air-cavity Fabry-Perot gas pressure sensor based on core-offset fusion of hollow-core fibers

Extrinsic Fabry-Perot Cavity Based Fiber-Optic Sensor for Low Pressure Measurement

Asymmetric Reflection Spectrum of Fabry-Perot Interferometer and the Application in Pressure Sensing

Fabry-Perot Fiber Pressure Sensor Based on White Light Interferometry and Intensity Demodulation Method

High-sensitivity Hydraulic Pressure Sensor Realized with PDMS Film-Based Fabry-Perot Interferometer

Nonlinear Hydraulic Pressure Response of an Improved Fiber Tip Interferometric High-Pressure Sensor