Abstract:The pulse current method, acoustic and ultrasonic partial discharge (PD) detection, and voiceprint PD detection are commonly used detection methods for the PD detection of power equipment. To study the characteristics of PD signals of typical discharge models based on the principles of the above three detection methods, an acoustic detection experimental system consisting of a needle-tip model and a surface model was built. Acoustic tests were carried out on needle-tip models with different curvature radii and surface discharge models with different lengths of conductive paste. The experimental results showed that acoustic and ultrasonic PD detection and voiceprint PD detection exhibited different sensitivities to the needle-tip discharge models, and the combination of acoustic and ultrasonic PD and voiceprint PD detection was more beneficial for the comprehensive detection of cable PD signals. Based on voiceprint recognition technology, this study drew FFT (Fast Fourier Transformation) diagrams of different types of PD acoustic signals and analyzed the differences in the ultrasonic signal frequency distribution. The frequency band of the voiceprint PD signal of the needle-tip discharge models was concentrated in the range 17–27 kHz, and the frequency band of the voiceprint PD signal of the conductive paste discharge models was concentrated in the range 20–25 kHz. The measurement of voiceprint PD signals in these frequency bands were strengthened when the PD of a cable was detected on-site, which provides the basis for the use of the cable model for on-site PD detection.

Characterization of Partial Discharge Signals

Discrimination of Three or More Partial Discharge Sources by Multi-Step Clustering of Cumulative Energy Features

Extracting partial discharge signals from colored noises using chirplet transform

Identification of Partial Discharge Sources by Feature Extraction from a Signal Conditioning System

A Technique to Identify the Types of Partial Discharges

Study on waveform characteristics of partial discharge pulses in air

Extraction and Counting of Partial Discharges under Pulse Voltage

Noise Suppression and Pulse Extraction Method Based on Fluctuation Characteristics of Partial Discharge Signals

Detection and Identification Technologies of Wide Band Partial Discharge

Digital detection, grouping and classification of partial discharge signals at DC voltage

Partial Discharge Detection Method Based on DD-DT CWT and Singular Value Decomposition

Detection and Pre-Processing of Partial Discharge Ultrasonic Signals

Segmented Spectrum Energy Characteristics-based Density Clustering of Partial Discharge Signals

Partial Discharge Signals Separation Using Cumulative Energy Function and Mathematical Morphology Gradient

Separation and Classification of Concurrent Partial Discharge Signals Using Statistical-Based Feature Analysis

Recognition Of Partial Discharge Sources

Research on Characteristics of Acoustic Signal of Typical Partial Discharge Models

Time-frequency features extraction and classification of partial discharge UHF signals

Measurement and analysis for pulse sequence of partial discharge signals under DC voltage

Time-Frequency Features Extraction and Clustering Analysis of Partial Discharge UHF Pulses

Partial Discharge Pattern Classification by Singular Value Decomposition of Wavelet Packet Energy Features