Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

Heat Dissipation Consideration of High-Power Mid-Infrared Quantum Cascade Laser Arrays

Analysis on the Thermal Characteristics of Quantum Cascade Laser

Thermal Modeling and Analysis of High Power Semiconductor Laser Arrays

Thermal Investigation of Mid-Infrared Quantum Cascade Lasers under Quasi-Continuous-Wave Operations

QCL active region overheat in pulsed mode: effects of non-equilibrium heat dissipation on laser performance

High-Performance Quantum Cascade Lasers: Optimized Design Through Waveguide and Thermal Modeling

Quasi-Continuous-Wave Operations of Quantum Cascade Lasers

Numerical simulation of thermo-mechanical behavior in high power diode laser arrays

High Peak Power Mini-array Quantum Cascade Lasers Operating in Pulsed Mode

High-Power and Low-Threshold-Current-Density GaAs/AlGaAs Quantum Cascade Lasers

Two-Dimensional Simulation of Mid-Infrared Quantum Cascade Lasers: Temperature and Field Dependent Analysis

Quasi-continuous-wave operation of AlGaAs/GaAs quantum cascade lasers

Improved comb and dual-comb operation of terahertz quantum cascade lasers utilizing a symmetric thermal dissipation

Terahertz quantum cascade laser array with spatially-separated beams

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

Design and Simulation of THz Quantum Cascade Lasers

Thermal Analysis of High Power LED Array Packaging with Microchannel Cooler

Thermal Analysis of a Novel Compact Packaged Passively Cooled Laser Diode Array

Optimization of Heat-Dissipation Structure of High-Power Diode Laser in Space Environments

Monolithic beam combined quantum cascade laser arrays with integrated arrayed waveguide gratings

Approaches Tocompact QuantumCascade Lasermodules Withintegrated Coolers