Abstract:Overhead lines are generally used for electrical energy transmission. Also, XLPE underground cable lines are generally used in the city center and the crowded areas to provide electrical safety, so high voltage underground cable lines are used together with overhead line in the transmission lines, and these lines are called as the mixed lines. The distance protection relays are used to determine the impedance based fault location according to the current and voltage magnitudes in the transmission lines. However, the fault location cannot be correctly detected in mixed transmission lines due to different characteristic impedance per unit length because the characteristic impedance of high voltage cable line is significantly different from overhead line. Thus, determinations of the fault section and location with the distance protection relays are difficult in the mixed transmission lines. In this study, 154 kV overhead transmission line and underground cable line are examined as the mixed transmission line for the distance protection relays. Phase to ground faults are created in the mixed transmission line, and overhead line section and underground cable section are simulated by using PSCAD. The short circuit fault images are generated in the distance protection relay for the overhead transmission line and underground cable transmission line faults. The images include the RX impedance diagram of the fault, and the RX impedance diagram have been detected by applying image processing steps. The regression methods are used for prediction of the fault location, and the results of image processing are used as the input parameters for the training process of the regression methods. The results of regression methods are compared to select the most suitable method at the end of this study for forecasting of the fault location in transmission lines.

Three-phase Fault Location Based on Multiple Classifier Systemin Double-Circuit Transmission Lines

PMU-Based Fault Location Using Voltage Measurements in Large Transmission Networks

Single-Ended Fault Location for Hybrid Transmission Line Using Embedded Artificial Intelligence

An Efficient PMU-Based Fault-Location Technique for Multiterminal Transmission Lines

Power system fault identification and localization using multiple linear regression of principal component distance indices

Single phase to ground fault location method of overhead line based on magnetic field detection and multi-criteria fusion

Fault Classification for Transmission Lines Based on Group Sparse Representation.

Transmission line fault detection and classification based on SA-MobileNetV3

A New Method to Improve Fault Location Accuracy in Transmission Line Based on Fuzzy Multi-Sensor Data Fusion

Fault Location and Classification for Distribution Systems Based on Deep Graph Learning Methods

Non-contact Fault Location and Identification Method for Same-Tower Multi-Circuit Transmission Lines

A Group of Single-Ended Time-Domain Line Fault Location Methods Using Breaker Operation Information

Phasor Domain Transmission Line Fault Locating With Three Phase Distributed Parameter Modeling

Fault Location Estimation by Using Machine Learning Methods in Mixed Transmission Lines

Single Phase Ground Fault Locating Method of Multi-Branch Wind Farm Collector Lines

A Fault Location Method For Hybrid Three-terminal Transmission Line

Locating of Multi-Phase Faults of Ungrounded Distribution System

Fault Location Method of Multi-Terminal Transmission Line Based on Fault Branch Judgment Matrix

Study on fault line detection methods based on multi‐feature fusion in distribution systems

Fault Location in AC Transmission Lines with Back‐to‐back MMC‐HVDC Using ConvNets

Transmission Line Fault Diagnosis Method based on Improved Multiple SVM Model