Abstract:Thin film silicon solar cells are believed to be promising candidates for continuing cost reduction in photovoltaic panels because silicon usage could be greatly reduced. Since silicon is an indirect bandgap semiconductor, its absorption coefficient is low for photons in the wavelength ranges between 600nm and 1100nm. For high efficiency thin film modules, effective light trapping is essential. Traditional schemes such as textured transparent conductive oxide (TCO) and metal reflector have several disadvantages such as enhanced surface recombination, parasitic losses at the TCO/metal interface, and the lack of ability to control and optimize the textured surface. We have previously proposed to employ a light trapping structure, which combines a self-assembled submicron grating and a distributed Bragg reflector (DBR) on the backside of thin film silicon solar cells. The DBR works as a one-dimensional photonic crystal to obtain almost 100% reflectivity. The grating scatters the incident light into oblique angles to significantly enhance the optical path length. Numerical calculations predict that by optimizing the feature sizes of the grating and DBR, up to 31% relative efficiency increase can be obtained, compared to the bare thin film Si. By using self-assembly, the organized grating structure can be formed spontaneously at a much lower cost. Current-voltage relations and quantum efficiency measurements were taken to verify the performance of our designed back structure. In the wavelength range of 600-900nm, photon absorption is greatly enhanced. As a result, more than 20% relative efficiency enhancement is achieved for 1.5um thin film silicon cells. These numerical and experimental results show that a light trapping design can be low-cost and increase efficiencies for high performance thin film Si solar cells.

Optimization-based design of surface textures for thin-film Si solar cells — Are conventional Lambertian models relevant?

Optimization-based Design of Surface Textures for Thin-Film Si Solar Cells.

Design and analysis of one-dimensional nanostructure on amorphous silicon solar cell for surface reflectance reduction

Photonic Crystal Structures for Light Trapping in Thin-Film Si Solar Cells: Modeling, Process and Optimizations

Light Trapping Textures Designed by Electromagnetic Optimization for Sub-Wavelength Thick Solar Cells

Length Scale Dependence of Periodic Textures for Photoabsorption Enhancement in Ultra-thin Silicon Foils and Thick Wafers

Optoelectronic optimization of graded-bandgap thin-film AlGaAs solar cells. Part II: optimal antireflection front-surface texturing

Thin-film silicon solar cells: photonic design, process and fundamentals

Efficient Light Trapping Structure in Thin Film Silicon Solar Cells

Absorption Enhancement in Thin-Film Silicon Solar Cells with A Fourier-Series Based Periodic Array

Quasi-hemispherical pit array textured surface for increasing the efficiency of thin-film solar cells

Computational Optimal Design of Random Rough Surfaces in Thin-Film Solar Cells

Broadband Light Trapping and Absorption of Thin-Film Silicon Sandwiched by Trapezoidal Surface and Silver Grating

Silicon Periodic Nanostructures for High Efficiency Absorption in Thin Film Solar Cells

Numerical Analysis of Lamellar Gratings for Light-Trapping in Amorphous Silicon Solar Cells

Thin Film Silicon Solar Cell Design Based On Photonic Crystal And Diffractive Grating Structures

Optical Absorption Characteristics of Nanometer and Submicron A-Si:H Solar Cells with Two Kinds of Nano Textures

Light Trapping Concepts for Enhanced Absorption in Thin Silicon Solar Cells

Absorbing photonic crystals for silicon thin-film solar cells: Design, fabrication and experimental investigation

Integrated Photonic Structures For Light Trapping In Thin-Film Si Solar Cells

Quick Design of High Efficiency Light Trapping Nanostructures for Thin Film Silicon Solar Cells