Abstract:Piezoelectric transformers are increasingly getting popular in the electrical devices owing to several advantages such as small size, high efficiency, no electromagnetic noise and non-flammable. In addition to the conventional applications such as ballast for back light inverter in notebook computers, camera flash, and fuel ignition several new applications have emerged such as AC/DC converter, battery charger and automobile lighting. These new applications demand high power density and wide range of voltage gain. Currently, the transformer power density is limited to 40 W/cm(3) obtained at low voltage gain. The purpose of this study was to investigate a transformer design that has the potential of providing higher power density and wider range of voltage gain. The new transformer design utilizes radial mode both at the input and output port and has the unidirectional polarization in the ceramics. This design was found to provide 30 W power with an efficiency of 98% and 30 degrees C temperature rise from the room temperature. An electro-mechanical equivalent circuit model was developed to describe the characteristics of the piezoelectric transformer. The model was found to successfully predict the characteristics of the transformer. Excellent matching was found between the computed and experimental results. The results of this study will allow to deterministically design unipoled piezoelectric transformers with specified performance. It is expected that in near future the unipoled transformer will gain significant importance in various electrical components.

Power Density of Piezoelectric Transformers Improved Using a Contact Heat Transfer Structure

Radiator heightens power density of piezoelectric transformers

Acoustic Radiation of A Cylindrical Piezoelectric Power Transformer

Novel Progress in the Research of Piezoelectric Transformer

Temperature distribution analysis of piezoelectric transformer with heat couple component

The Modeling of a Piezoelectric Transformer Using a Transverse Vibration

A Review of the Research on Piezoelectric Transformer

Novel Progress in the Research of Circuit Used in the Piezoelectric Transformer

Experiment Research On Multilayer Piezoelectric Transformer

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

Disc piezoelectric ceramic transformers

Study on the Piezoelectric Transformer in the Bionic Active Member

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

Nonlinear processing of the output voltage of a piezoelectric transformer

Multilayer piezoelectric ceramic transformer with low temperature sintering

Effect of a middle layer on piezoelectric plate transformer

Recent Developments In Low-Fired Piezoelectric Ceramic Multilayer Transformer

Influence of Viscoelastic Interfaces on Power Transmission Through an Elastic Plate by Finite Piezoelectric Transducers

Dielectric Loss and Thermal Effect in High Power Piezoelectric Systems

Model based analysis of piezoelectric transformers

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density