Abstract:This paper displays a voltage-controlled oscillator (VCO) with high performance implemented in 0.18 μm CMOS. The proposed CMOS VCO adopts a current-reused method, analog coarse and fine tuning mechanisms, and an adaptive overdrive voltage control structure to increase the overall performance, such as the power dissipation, phase noise, and tuning range, and has a robust start-up condition. The current-reused complementary structure with higher transistor transconductances is to save power consumption; the analog coarse and fine tuning mechanisms are to effectively widen the tuning range; and the adaptive overdrive voltage control technique is to change the transconductances of the transistors to improve power consumption by reasonably biasing the gate and body terminals in a class-AB mode to adjust the threshold voltage of the NMOS transistors. The proposed CMOS VCO adopts the class-AB mode to improve the overall performance and the start-up condition. The figure-of-merit (FOM) and FOM with tuning range (FOMT) are used in evaluating the CMOS VCO performance. The measured phase noise at 1 MHz and 10 MHz offsets is –130.34 dBc/Hz and –150.96 dBc/Hz at the 3.38 GHz operating frequency, respectively. The proposed CMOS VCO has a tuning range between 2.85 and 3.62 GHz corresponding to 23.8% for the fifth-generation (5G) wireless communication applications. The proposed CMOS VCO core using a 1.4-V supply consumes 7.5 mW DC power. The FOMs and FOMTs at 1- and 10-MHz offsets are −192.2, −192.8, −199.7, and −200.3 dBc/Hz, respectively, from the 3.38 GHz output frequency.

Novel hybrid type Automatic Amplitude Control loop VCO

A 92 Fsrms Jitter Frequency Synthesizer Based on a Multicore Class-C Voltage-Controlled Oscillator with Digital Automatic Amplitude Control

A 3.1–4.2 GHz Automatic Amplitude Control Loop VCO with Constant Kvco and <10mv Amplitude Variation

A Wideband Voltage-Controlled Oscillator with Gain Linearized Varactor Bank

A Digitally Reconfigurable Auto Amplitude Calibration Method for Wide Tuning Range VCO Design

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

CMOS voltage-controlled oscillator with automatic amplitude control

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

Improved Amplitude Control Technique of Low Phase Noise LC VCO

A Low Gain Variation <i>LC</i>-VCO With Mutual Inductive Tuning for <i>K</i><sub>VCO</sub> Linearity Compensation

A high‐linearity LC‐VCO with combined MOS varactors and bulk‐biased PMOS varactors for gain variation compensation

A Class-C Eight-Phase Voltage-Controlled Oscillator With 184.2 dBc/Hz FoM and Loop-Based Superharmonic Coupling in 65nm CMOS

Automatic Band Selection Technology for the Multi Bands LC VCO

A 4.6–5.6 GHz Constant KVCO Low Phase Noise LC-VCO and an Optimized Automatic Frequency Calibrator Applied in PLL Frequency Synthesizer

A Voltage-Controlled Ring Oscillator With VCO-Gain Variation Compensation

A Wideband Simplified Transformer-Based VCO with Digital Amplitude Calibration.

CMOS Voltage-Controlled Oscillator with Complementary and Adaptive Overdrive Voltage Control Structures

Class-C VCO with Amplitude Feedback Loop for Robust Start-Up and Enhanced Oscillation Swing

A 3.01–3.82 GHz CMOS LC Voltage-Controlled Oscillator with 6.29% VCO-gain Variation for WLAN Applications