Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Characteristics and modeling of motor load on partial motor stalled conditions

Sequential Parameter Estimation of a Simplified Induction Motor Load Model

Parameters identification of practical load model with voltage phase considered

Identification of a composite load model with applications

Comparison of three composite induction motor load models

Steady Performance Analysis on Single-Phase Brushless DC Motor

Simplified Dynamic Model of the Electric Load Supplied by a Switching Power Supply

Improved Analytical Modeling of a Novel Ironless Linear Synchronous Machine With Asymmetrical Double-Layer Winding Topology

Composite Load Models Based on Field Measurements and Their Applications in Dynamic Analysis

Load Modeling with Considering Frequency Characteristic

Research on load model of VF based motor drive

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Analytic Formulae for Estimating Motor Proportion of Load Model under Small Disturbance

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Analysis of Induction Motor Cascading Stall in A Simple System Based on the Cascade Model

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Overall Electrical Parameters Identification for IPMSMs Using Current Derivative to Avoid Rank Deficiency

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Analysis on Induction Motor Cascading Stall Based on CASCADE Model

Steady Operation State Analysis of an Induction Motor Group in a Simple Power System