Abstract:An analytical and meshless modeling for solving thickness shear vibration in an infinite piezoelectric quartz resonator with partial non-circular electrodes is proposed. Firstly, two-dimensional scalar differential equations derived by Tiersten and Smythe are adopted and transformed into the polar coordinate system. Secondly, displacement patterns for the electroded and unelectroded regions are assumed as a series of converging and outgoing cylindrical waves in the form of Bessel functions, where radiation conditions at infinity can be satisfied automatically. Finally, circumferential functions at interface are decomposed into Fourier series in order to deal with continuity conditions. It should be stressed that the general formulation proposed in this paper has a higher calculation accuracy and requires no division of the mesh compared to FEM/BEM, which can satisfy continuity conditions in an integrated manner over the whole interface or boundary. Resonance frequencies and mode shapes of different electrode shapes including circular, equilateral triangle, rectangular, elliptical, and pentagonal electrodes are numerically calculated and compared with FEM simulations, which efficiently validate high precision and wide applicability of this method. Utilizing this method, the influence of non-circular electrodes on the working performance of the quartz resonator is investigated systematically. The qualitative analysis and quantitative results obtained in this paper can provide the theoretical guidance for the design, measurement and manufacturing optimization of piezoelectric resonators.

Thickness-shear Vibration of an AT-cut Quartz Plate with Elliptical Electrodes and Implications in Optimal Blank Geometry

Thickness-shear Modes of an Elliptical, Contoured At-Cut Quartz Resonator

Thickness-Shear Vibration Characteristics of an At-Cut Quartz Resonator with Rectangular Ring Electrodes

An Analysis of Thickness-Shear Vibrations of Doubly-Rotated Quartz Crystal Plates with the Corrected First-Order Mindlin Plate Equations

Thickness-shear vibration of rotated Y -cut quartz plates with unattached electrodes and asymmetric air gaps

Thickness-shear Frequencies of an Infinite Quartz Plate with Material Property Variation Along the Thickness

Thickness-shear Vibration of an AT-cut Quartz Resonator with a Hyperbolic Contour.

Thickness-shear Vibration of AT-cut Quartz Plates Carrying Finite-Size Particles with Rotational Degree of Freedom and Rotatory Inertia [Correspondence]

The investigation of trapped thickness shear modes in a contoured AT-cut quartz plate using the power series expansion technique

An Analysis of Thickness-shear Vibrations of an Annular Plate with the Mindlin Plate Equations

Effects of Unequal Electrode Thickness, Location, and Size on Thickness-Shear Mode Quartz Piezoelectric Resonators

Surface Roughness Effects on the Vibration Characteristics of AT-Cut Quartz Crystal Plate

Bechmann’s Number for Harmonic Overtones of Thickness-Shear Vibrations of Rotated Y-Cut Quartz Crystal Plates

Trapped Thickness-Shear Modes in a Contoured, Partially Electroded AT-cut Quartz Resonator

Variational Analysis of Thickness-Shear Vibrations of a Quartz Piezoelectric Plate with Two Pairs of Electrodes As an Acoustic Wave Filter

Energy Trapping of Thickness-Shear Modes in Inverted-Mesa At-Cut Quartz Piezoelectric Resonators

Effects of Electrode off Centre on Trapped Thickness-Shear Modes in Contoured AT-Cut Quartz Resonators

An analytical and meshless modeling for vibration analysis of an infinite quartz resonator with non-circular electrodes

Frequency-Temperature Relations of Novel Cuts of Quartz Crystals for Thickness-Shear Resonators

Electrically Forced Thickness-Shear and Flexural Vibrations of Rectangular Piezoelectric Plates of Rotated Y-cut Quartz and Langasite

Frequency Shift of Thickness-Shear Vibrations of AT-Cut Quartz Resonators Due to a Liquid Layer with the Electrode Stiffness Considered