Abstract:Recent progress in nanotechnology has enabled to design the advanced functional micro-/nanostructures utilizing the unique properties of ultrathin films. To ensure these structures can reach the expected functionality, it is necessary to know the density, generated internal stress and the material properties of prepared films. Since these films have thicknesses of several tens of nm, their material properties, including density, significantly deviate from the known bulk values. As such, determination of ultrathin film material properties requires usage of highly sophisticated devices that are often expensive, difficult to operate, and time consuming. Here, we demonstrate the extraordinary capability of a microcantilever commonly used in a conventional atomic force microscope to simultaneously measure multiple material properties and internal stress of ultrathin films. This procedure is based on detecting changes in the static deflection, flexural and torsional resonant frequencies, and the corresponding quality factors of the microcantilever vibrating in air before and after film deposition. In contrast to a microcantilever in vacuum, where the quality factor depends on the combination of multiple different mechanical energy losses, in air the quality factor is dominated just by known air damping, which can be precisely controlled by changing the air pressure. Easily accessible expressions required to calculate the ultrathin film density, the Poisson’s ratio, and the Young’s and shear moduli from measured changes in the microcantilever resonant frequencies, and quality factors are derived. We also show that the impact of uncertainties on determined material properties is only minor. The validity and potential of the present procedure in material testing is demonstrated by (i) extracting the Young’s modulus of atomic-layer-deposited TiO2 films coated on a SU-8 microcantilever from observed changes in frequency response and without requirement of knowing the film density, and (ii) comparing the shear modulus and density of Si3N4 films coated on the silicon microcantilever obtained numerically and by present method.

A reliable test key for thin film mechanical properties characterization

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

Micro-mechanical Characterisation for MEMS Thin Films by Bending Μ-Machined Cantilevers

Method for measuring mechanical properties of MEMS thin film materials

A New Method for the Micro-Tensile Testing of Thin Film

A Micro-Tensile Method for Measuring Mechanical Properties of Mems Materials

Measuring Thin Film Elastic Modulus Using A Micromachined Cantilever Bending Test by Nanoindenter

Nanomechanical Characterisation of MEMS Thin Film Materials

Determining the Poisson’s ratio of thin film materials using resonant method

Measuring stiffness and residual stress of thin films by contact resonance atomic force microscopy

Design of testing chip for measuring mechanical properties of thin films

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Characterizing the Poisson’s Ratio of Thin Films Using Resonance Method

A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen by Parylene Passivation Technique

Evaluation of Mechanical Properties and Strain Criterion for Realibility Design of Micromachined Polysilicon Thin Films

A Systematic Method for Characterizing the Elastic Properties and Adhesion of a Thin Polymer Membrane

Process nano scale mechanical properties measurement of thin metal films using a novel paddle cantilever test structure

Simple Non-Destructive Method of Ultrathin Film Material Properties and Generated Internal Stress Determination Using Microcantilevers Immersed in Air

A Measuring System for Mechanical Characterization of Thin Films Based on a Compactin Situmicro-Tensile Tester and SEM Moiré Method